Handleiding
Je bekijkt pagina 14 van 39
14
The Optimo Primes are compatible with the Cooke /i Technology version 3.0 (June 2012) and are ARRI LDS2 ready.
Updates of the embedded software can be found at https://www.angenieux.com/service-and-support/#downloads or by contacting your
distributor. Use the cable #66068093AA to connect the lens to the USB port of the computer for software update and focus or iris data adjustments
during lens maintenance.
Voltage
Consumption
Camera connector
4 pins on PL mount
9-42 V
About 50 mA / 12V
External connector
LEMO 4 pins connector EGB00304CLL
9-42 V
About 50 mA / 12V
If you are facing communication problems between the camera and the lens:
- If the lens is connected with the Lemo connector, unplug it, wait few seconds and reconnect it
- If it is still not working, switch off the camera or the external viewer
- Disconnect the lens
- Reconnect the lens with the camera or the external device
- Switch the camera or the external device back on
- If the problem continues, contact your local reseller or Angénieux international customer support at: angenieuxservice@fr.thalesgroup.com
6 - Electronics specifications
Bekijk gratis de handleiding van Angénieux Optimo Prime 75, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Angénieux |
| Model | Optimo Prime 75 |
| Categorie | Lens |
| Taal | Nederlands |
| Grootte | 9433 MB |
