Anchor Audio AN-30U2BT handleiding

Handleiding

123456789101112131415161718192021/ 21

Afdrukken

Je bekijkt pagina 9 van 21

8

USING YOUR ANCHOR AUDIO WIRELESS MICROPHONES

The very first time you connect an Anchor Audio wireless microphone to your AN-30, you

will need to pair it. After the first time, your speaker will recognize the microphone automati-

cally when you turn the microphone on.

Anchor Audio’s wireless microphones have a range of 300’ line-of-sight from the AN-30.

Wireless receiver on

equipped AN-30 back panel

Anchor Audio belt pack and handheld

wireless microphone

TO PAIR WIRELESS MICROPHONES

NOTE: You may pair only one microphone at a time.

Each Mic Receiver included supports two wireless microphones. Two Receivers = Four

wireless microphones supported. You will only need to pair each microphone one time.

1. Start with your speaker turned on, and turn the Wireless Volume (VOL) knob clockwise.

Then, press and hold the PAIRING button until the green light for Mic 1 flashes. Release

the button.

2. Turn the wireless microphone or belt pack on, then press and hold the MUTE until the

red light turns off. Release the MUTE button.

3. Press and hold the MUTE button again until a green light flashes on the microphone or

belt pack.

4. The microphone is paired when the green light is solid on both the microphone and the

speaker.

5. Repeat these steps for Mic 2 on the same speaker. (Mic 1 will stay paired through this

process.)

Made in the USA

PAIRING

BUTTON

INDICATOR

LIGHTS

WIRELESS

VOLUME/

POWER KNOB

Pair two microphones Pair a handheld

microphone

Pair a belt pack

microphone

123456789101112131415161718192021/ 21

Bekijk gratis de handleiding van Anchor Audio AN-30U2BT, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

Andere merken in Niet gecategoriseerd