AMX NMX-WP-N1512 handleiding
Handleiding
Je bekijkt pagina 22 van 34
Chapter 3: Windowing Processor Configuration Options
22
N1512 Windowing Processor User Manual
Stored Presets Section
The Stored Presets section of the Unit Settings page is shown in Figure 13. This section allows you to auto-load presets through
scripting language and share presets between devices. Options are described in Table 5
.
FIG. 13
Stored Presets Section
Gratuitous ARP Enable the Windowing Processor to send a periodic
Address Resolution Protocol (ARP) packet to the
network.
ARP Intervals Determine how often (in seconds) the unit transmits
gratuitous ARP packets.
Unsolicited Status Enable the unit to send a periodic status packet to
the Send Status Address described next.
Send Status Address When Unsolicited Status is enabled, the Windowing
Processor sends a periodic status packet to the IP
address specif ied here.
Status Intervals (secs) Determine how often (in seconds) the unit transmits
status packets.
MPC Enable to turn on
Minimal Proprietary Compression
(MPC)
output.
Enabled by default. Uncheck the box to disable MPC
mode (resulting in uncompressed output). Leave at
default unless using older N-Series equipment that
does not have MPC support.
Output Sync Enable to sync the Windowing Processor video output
to the video stream input given by the Sync Stream
setting (described next).
Sync Stream Enter the video stream number to use to sync the
Windowing Processor video output when the Output
Sync option is enabled.
Win 1 - 4 Speed Set the speed (pixels per frame) to which a window will
move to its new location after rearrangement.
TTL Select the Time To Live (TTL) for the transmit audio and
video streams.
VLAN Tagging Enable to have the unit insert a VLAN identification
number into the packet headers (in order to identify
which VLAN the packet belongs to). The VLAN # setting
determines what number is inserted.
VLAN # Enter the VLAN identification number. If VLAN Tagging
is enabled, this number is added to the packet headers
for packet identification purposes.
DSCP # Select the Differentiated Services Code Point (DSCP) for
the transmit audio and video streams.
Allow SVSI Multicast Disable this option to prevent the selected port(s) from
outputting multicast video traffic.
Particularly useful if you are connecting a non-SVSI
device to a port for network-based control.
Cancel Click to return all controls to the last saved
configuration.
Save Click to accept changes made to these controls.
TABLE 4 Unit Settings Page: Unit Setup Section (Cont.)
Option Description Notes
Bekijk gratis de handleiding van AMX NMX-WP-N1512, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | AMX |
| Model | NMX-WP-N1512 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 8332 MB |
