American DJ WMS2 handleiding
Handleiding
Je bekijkt pagina 21 van 30
21
RIGGING BAR
3. Align the bottom hole of the plate bracket with the small mounting hole on the corner of the video
panel. Insert and M6x16 screw through the bottom hole of the plate bracket into the video panel,
and tighten to secure in place. Refer to the image from Step 2.
4. Repeat steps 2 and 3 at the other upper corner of the video panel.
5. Additional video panels hanging from the bottom of another panel must also be secured using the
mounting bolts along the top edges and mounting holes on the bottom edges of each panel. They
should also be supported with a plate bracket and two (2) M6x16 screws at each corner.
M6x16
Screws
Plate
Bracket
Bekijk gratis de handleiding van American DJ WMS2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | American DJ |
| Model | WMS2 |
| Categorie | Monitor |
| Taal | Nederlands |
| Grootte | 5510 MB |