American DJ WMS2 handleiding

Handleiding

123456789101112131415161718192021222324252627282930/ 30

Afdrukken

Je bekijkt pagina 20 van 30

20

RIGGING BAR

The video panel is compatible with ADJ’s WMSRB1 Rigging Bar (sold separately). To install the rig-

ging bar, follow the steps below. A qualied technician or trained professional is required to y

the VSRB1 Rigging Bar/Video Panel assembly.

1. Screw the three mounting bolts on the top edge of the video panel with the matching mounting

holes on the bottom of the rigging bar.

2. Place the panel on a secure, stable surface with the back facing up. Align one of the included

plate brackets at the upper corner of the panel to connect the panel and the rigging bar. The upper

hole of the plate bracket should line up with the hole on near the end of the rigging bar. Insert an

M6x55 screw through the upper hole of the plate bracket and through the rigging bar, then secure

in place with a matching nut on the other side of the rigging bar.

M6x16

Screw

M6x55

Screw

Plate

Bracket

123456789101112131415161718192021222324252627282930/ 30

Bekijk gratis de handleiding van American DJ WMS2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

Andere merken in Monitor