American DJ WMS2 handleiding
Handleiding
Je bekijkt pagina 14 van 30
14
INSTALLATION
DO NOT INSTALL THE PANEL IF YOU ARE NOT QUALIFIED TO DO SO!
INSTALLATION BY QUALIFIED TECHNICIANS ONLY!
INSTALLATIONS SHOULD BE CHECKED BY A QUALIFIED PERSON AT LEAST
ONCE A YEAR!
FLAMMABLE MATERIAL WARNING
Keep panel(s) a minimum of 5.0 feet (1.5m) away from ammable materials and/or
pyrotechnics.
ELECTRICAL CONNECTIONS
A qualied electrician should be used for all electrical connections and/or instal-
latons.
A MAXIMUM OF 15 PANELS may be suspended from each other in a vertical col-
umn. There is no limit on the number of panels that may be installed in a single
horizontal row. Always consult a professional equipment installer to verify that
your mounting surface or structure is certied to support the weight of the panels
and any associated accessories or cables. Note that additional processing power
may be necessary to operate larger quantities of panels.
USE CAUTION WHEN POWER LINKING PANELS OF DIFFERENT MODEL TYPES,
AS POWER CONSUMPTION CAN VARY WITH MODEL TYPE, AND MAY EXCEED
THE MAX POWER OUTPUT OF THIS PANEL. CONSULT THE SILK SCREEN FOR
MAX CURRENT RATING.
Input Power 1100W (110V), 2200W (220V)
Output Power 800W (110V), 2000W (220V)
Average Power Consumption 200W
• WARNING! The safety and suitability of any lifting equipment, installation location/platform, anchoring/
rigging/mounting method and hardware, and electrical installation is the sole responsibility of the in-
staller.
• Panel(s) and all panel accessories and all anchoring/rigging/mounting hardware MUST be installed fol-
lowing all local, national, and country commercial electrical and construction codes and regulations.
• Before rigging/mounting a single panel or multiple interconnected panels to any metal truss/structure, a
professional equipment installer MUST be consulted to determine if the metal truss/structure or surface
is properly certied to safely hold the combined weight of the panels(s), clamps, cables, and all acces-
sories.
• Inspect metal truss/structure visually to ensure it does not ex and/or become deformed due to the
weight of the panel(s). Damage caused to panel(s) by mechanical stress is not covered by warranty.
• Panel(s) should be installed in areas outside walking paths, seating areas, and areas where unauthor-
ized personnel might reach the panel(s) by hand. Access under work area must be blocked.
• NEVER stand directly below the panel(s) when rigging, removing, or servicing.
• OVERHEAD RIGGING: Overhead xture installation must always be secured with a secondary safety
attachment, such as an appropriately rated safety cable. Overhead rigging requires extensive experi-
ence, including calculating working load limits, knowledge of the installation material being used, and
periodic safety inspection of all installation material and the xture itself, among other skills. If you lack
these qualications, do not attempt the installation yourself. Improper installation can result in bodily
injury and property damage.
Bekijk gratis de handleiding van American DJ WMS2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | American DJ |
| Model | WMS2 |
| Categorie | Monitor |
| Taal | Nederlands |
| Grootte | 5510 MB |