American DJ Vizi CMY300 handleiding
Handleiding
Je bekijkt pagina 15 van 37
15
GOBOS & GOBO REPLACEMENT
2. Remove the shell to access the gobo wheel. Turn the wheel by hand until you come across the
gobo to be replaced appears..
3. Remove the individual gobo holders by gently pushing the gobo holder (Not the wheel) up and
away from the gobo wheel. Do not the push the gobo holder to far. While pushing the gobo holder
away from the wheel, pull the gobo holder up and out.
4. Once the gobo holder has been removed, notice that high temperature silicon sealant applied to
the retainer ring. Using a small flathead screwdriver, very gently scrape away the silicon sealant to
release the retainer ring. After the retainer ring is removed, remove the gobo.
5. Change the gobo and replace the retainer ring. Reapply high temperature silicon sealant to the
same areas on the retainer ring.
6. Insert the gobo frame back into the unit, positioning it in same way as the other gobo frames.
7. Reassemble the unit.
Note that the Gobo Wheel/Color Wheel Assemblies are shown here for clarity. It is not
necessary to remove the assemblies to access the individual gobos in their holders.
Bekijk gratis de handleiding van American DJ Vizi CMY300, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | American DJ |
| Model | Vizi CMY300 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 8413 MB |
