American DJ Hydro Beam X1 handleiding
Handleiding
Je bekijkt pagina 9 van 42
9
SAFETY GUIDELINES
This xture is a sophisticated piece of electronic equipment. To guarantee smooth operation, it is
important to follow all instructions and guidelines in this manual. ADJ Products, LLC is not respon-
sible for injury and/or damages resulting from the misuse of this xture due to the disregard of the
information printed in this manual. Only qualied and/or certied personnel should perform instal-
lation of this xture, and only the original rigging parts included with this xture should be used for
installation. Any modications to the xture and/or the included mounting hardware will void the
original manufacturer’s warranty and increase the risk of damage and/or personal injury.
PROTECTION CLASS 1 - FIXTURE MUST BE PROPERLY GROUNDED
THERE ARE NO USER SERVICEABLE PARTS INSIDE THIS UNIT.
DO NOT ATTEMPT ANY REPAIRS YOURSELF; DOING SO WILL VOID
YOUR MANUFACTURER’S WARRANTY. DAMAGES RESULTING
FROM MODIFICATIONS TO THIS FIXTURE AND/OR THE DISREGARD
OF SAFETY INSTRUCTIONS AND GUIDELINES IN THIS MANUAL
VOID THE MANUFACTURER’S WARRANTY AND ARE NOT SUBJECT
TO ANY WARRANTY CLAIMS AND/OR REPAIRS.
DO NOT PLUG FIXTURE INTO A DIMMER PACK!
NEVER OPEN THIS FIXTURE WHILE IN USE!
UNPLUG POWER BEFORE SERVICING FIXTURE!
MAXIMUM AMBIENT OPERATING TEMPERATURE IS 104° F (40° C)!
NEVER TOUCH FIXTURE WITH BARE HANDS DURING OPERATION, AS SUR-
FACE TEMPERATURE DURING OPERATION MAY REACH 167° F (75° C)
KEEP FLAMMABLE MATERIALS AWAY FROM FIXTURE!
NEVER LOOK DIRECTLY INTO THE LIGHT SOURCE!
RETINA INJURY RISK - MAY INDUCE BLINDNESS!
SENSITIVE PERSONS MAY SUFFER AN EPILEPTIC SHOCK!
ENSURE ALL CONNECTIONS AND END CAPS ARE PROPERLY SEALED WITH
A DIELECTRIC GREASE (AVAILABLE AT MOST ELECTRICAL SUPPLIERS) TO
PREVENT WATER CORROSION AND/OR ELECTRICAL SHORT CIRCUIT.
IF THE FIXTURE IS EXPOSED TO ENVIRONMENTAL TEMPERATURE CHANG-
ES, SUCH AS RELOCATION FROM A COLD OUTDOOR ENVIRONMENT TO A
WARM INDOOR ENVIRONMENT, DO NOT POWER THE FIXTURE ON IMMEDI-
ATELY. INTERNAL CONDENSATION AS A RESULT OF ENVIRONMENTAL TEM-
PERATURE CHANGE CAN CAUSE INTERNAL FIXTURE DAMAGE. LEAVE THE
FIXTURE POWERED OFF UNTIL IT HAS REACHED ROOM TEMPERATURE
BEFORE POWERING ON.
Bekijk gratis de handleiding van American DJ Hydro Beam X1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | American DJ |
| Model | Hydro Beam X1 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6603 MB |
