American DJ Hydro Beam X1 handleiding
Handleiding
Je bekijkt pagina 10 van 42
10
• RISK GROUP 3 - RISK OF EXPOSURE TO ULTRAVIOLET (UV)
RADIATION!
• FIXTURE EMITS HIGH INTENSITY WAVELENGTH OF
ULTRAVIOLET LIGHT.
• WEAR PROPER EYE AND SKIN PROTECTION.
• DO NOT OPERATE FIXTURE WITH DAMAGED/MISSING
EXTERNAL COVER OR PROTECTIVE LENS.
• DO NOT LOOK DIRECTLY INTO THE (UV) LIGHT AND/OR VIEW
(UV) LIGHT DIRECTLY WITH OPTICAL INSTRUMENTS THAT
MAY CONCENTRATE THE LIGHT/RADIATION OUTPUT.
• AVOID PROLONGED PERIODS OF EXPOSURE.
• AVOID WEARING WHITE COLOR CLOTHING AND/OR USING
(UV) PAINTS ON SKIN.
• AVOID DIRECT EYE AND/OR SKIN EXPOSURE AT DISTANCES
SHORTER THAN 11 FEET (3.3 METERS).
• INDIVIDUALS SUFFERING FROM A RANGE OF EYE
CONDITIONS, SUNLIGHT EXPOSURE DISORDERS, OR
INDIVIDUALS USING PHOTOSENSITIVE MEDICATION
MAY EXPERIENCE DISCOMFORT IF EXPOSED TO THE
ULTRAVIOLET (UV) LIGHT EMITTED FROM THIS FIXTURE.
SAFETY GUIDELINES
• DO NOT TOUCH the xture housing during operation. Turn OFF the power and allow approxi-
mately 15 minutes for the xture to cool down before servicing.
• DO NOT shake xture, and avoid brute force when installing and/or operating xture.
• DO NOT operate xture if the power cord has become frayed, crimped, damaged and/or if any of
the power cord connectors are damaged and do not insert into the xture securely with ease.
• NEVER force a power cord connector into the xture. If the power cord or any of its connectors
are damaged, replace it immediately with a new one of the same power rating.
• DO NOT block any air ventilation slots, and do NOT allows them to be obstructed by dirt, dust, or
other debris. Allow approx. 7.9” (20cm) between the xture and other devices or a wall for proper
cooling.
• When installing xture in a suspended environment, always use mounting hardware that is no less
than M10 x 25 mm, and always attach an appropriately rated safety cable.
• ALWAYS disconnect xture from main power source before performing any type of service and/or
cleaning procedure.
• Only handle the power cord by the plug end, and never pull out the plug by tugging the wire por-
tion of the cord.
• During the initial operation of this xture, a light smoke or smell may emit from the interior of the
xture. This is a normal process and is caused by excess paint in the interior of the casing burning
off from the heat associated with the lamp and will decrease gradually over time.
• Consistent operational breaks will ensure xture will function properly for many years.
• ONLY use the original packaging and materials to transport the xture in for service.
Bekijk gratis de handleiding van American DJ Hydro Beam X1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | American DJ |
| Model | Hydro Beam X1 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6603 MB |
