American DJ Hydro Beam X1 handleiding
Handleiding
Je bekijkt pagina 16 van 42
16
TORQUE SETTINGS
ALL SCREWS MUST BE TIGHTENED WITH A TORQUE DRIVER. All screws are Allen Head
screws. Please refer to the illustration and table below for screw locations, screw quantity, and torque
settings. The number listed in the “#” column corresponds to the location on the xture.
1 Lens Assembly to Head Casting (x14) 6.5 - 8.7 In-Lb / 3mm Hex
2 Lamp Cover to Head Casting (x4) 6.7 - 9.6 In-Lb / 4mm Hex
3 Plastic Head Cover to Head Casting (4 x each side = 8 total) 6.5 - 8.7 In-Lb / 3mm Hex
4 Yoke Arm Cover to Yoke Frame (11 x each side = 22 total) 6.5 - 8.7 In-Lb / 3mm Hex
5 Access Cover to Yoke Frame (x4) Manual Screwdriver / 3mm Hex
6 Bottom Cover to Base Casting (x16) 6.7 - 9.6 In-Lb / 3mm Hex
7 Power and Data Connector to Base Casting (x8) 6.5 - 8.7 In-Lb / Torx T8
8 1/4 Turn Adapter Plate to Bottom Cover (x16) 6.5 - 8.7 In-Lb / 3mm Hex
1
4
2
7
3
5
6
6
6
6
8
8
Bekijk gratis de handleiding van American DJ Hydro Beam X1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | American DJ |
| Model | Hydro Beam X1 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6603 MB |
