American DJ Gobo Projector IR handleiding

Niet gecategoriseerd

American DJ

6 pagina's

PDF beschikbaar

Handleiding

ADJ Products, LLC - www.adj.com - Gobo Projector IR User Manual Page 4

Gobo Projector IR Precautions

Safety Issue: This unit may blow the fuse if the maximum allotted

load of 1 amps is reached. If the fuse needs replacement, please see

fuse replacement on page 8.

• Be sure the local power outlet match the required voltage of the

unit.

• Disconnect from main power before making any type of connection.

• Do not remove the cover under any conditions. There are no user

serviceable parts inside.

• Always be sure to mount this unit in an area that will allow proper

ventilation. Allow about 6” (15cm) between this device and a wall.

• To reduce the risk of electrical shock or re, do not expose this unit

rain or moisture

• This unit is intended for indoor use only, use of this product out-

doors voids all warranties.

• During long periods of non-use, disconnect the unit’s main power.

• Always mount this unit in safe and stable matter.

• Power-Cord Protection - Power-supply cords should be routed

so that they are not likely to be walked on or pinched by items

placed upon or against them, paying particular attention to cords at

plugs, convenience receptacles, and the point where they exit from

the fixture. Do not attempt to remove or break o the ground prong

from the electrical cord. This prong is used to reduce the risk of

electrical shock and re in case of an internal short.

• The fixture should be serviced by qualified service personnel when:

A. The power cord or the plug has been damaged.

B. Objects have fallen, or liquid has been spilled into the appliance.

C. The appliance has been exposed to rain or water.

D. The fixture does not appear to operate normally or exhibits a

marked change in performance.

Gobo Projector IR Operation

Introduction: The ADJ Gobo Projector IR is a rotating gobo projec-

tor. This fixture is designed for mobile DJ’s, clubs, bands, roller rinks

and any arena that requires a compact, light weight, easy to use unit.

Power Supply: Before plugging your unit in, be sure the source volt-

age in your area matches the required voltage for your ADJ Gobo Pro-

jector IR before attempting operation.

Operation: This fixture is designed to operate as a stand alone,

rotating gobo projector, there is no need of a controller. It has been

tested and there is no assembly necessary. The Gobo Projector IR

is ready to be plugged in out of the box. Only use the included I.E.C.

power cable supplied with the unit. When this fixture is plugged in,

the unit will project the included gobo. Using the button located at

the back of the unit, you can make the gobo remain static or make

the gobo rotate counter-clockwise.

After plugging the unit if there is no LED output check the fuse. If the

fuse has not popped, please contact customer support for further

instructions. This fixture features a light weight case design and an

adjustable hanging bracket.

ADJ Products, LLC - www.adj.com - Gobo Projector IR User Manual Page 5

Bekijk gratis de handleiding van American DJ Gobo Projector IR, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.