American DJ Encore Burst 100 IP handleiding

Niet gecategoriseerd

American DJ

22 pagina's

PDF beschikbaar

Handleiding

ADJ Products, LLC - www.adj.com - Encore Burst 100 IP User Manual Page 13

Encore Burst 100 IP Operating Instructions

DMX Address - DMX Address Setting.

1. Press either the MENU, UP, or DOWN buttons until “DMX Address” is displayed and press ENTER.

2. The current DMX address will now be displayed. Press the UP or DOWN buttons to nd your

desired DMX address and press ENTER to conrm your setting. Press the MENU button to exit

without any changes.

DMX CH Mode - This will let you select your desired DMX channel mode.

1. Press either the MENU, UP, or DOWN buttons until “DMX CH Mode” is displayed and press

ENTER.

2. The current DMX channel mode will now be displayed. Press the UP or DOWN buttons to nd

your desired DMX channel mode and press ENTER to conrm your setting. Press the MENU

button to exit without any changes.

No DMX State - This mode is used as a precaution mode. In case the DMX signal is lost

or interrupted, the operating mode chosen in this setup is the running mode the xture will revert

to when the DMX signal is lost.

1. Press either the MENU, UP, or DOWN buttons until “No DMX State” is displayed and press ENTER.

2. Press the UP or DOWN buttons to nd the operating mode you would like the unit to automatically

revert to if the DMX signal is lost or interrupted.

- Hold Last - If the DMX signal is lost or interrupted, the unit will stay in the last DMX setting.

- Blackout - If the DMX signal is lost or interrupted, the unit will automatically go into standby mode.

- Manual - If the DMX signal is lost or interrupted, the unit will default to the settings made under the

“Manual Control” function. See “Manual Control” on page 15 for more information.

3. Once you have found your desired setting press ENTER to conrm.

Dim Modes - This will let select your desired dimmer mode. In this mode the dimmer

speed can also be adjusted. The dimmer speed adjustment will affect all dimmer modes.

1. Press either the MENU, UP, or DOWN buttons until “Dim Modes” is displayed and press ENTER.

2. 1 of 6 dimmer curves or dim speed will be displayed. “Standard”, “Stage”, “TV”, “Architectural”,

“Theatre”, or “Stage 2”. See the dimmer mode chart on page 18 for more info.

3. Press the UP or DOWN buttons to nd your desired dimmer curve and press ENTER to conrm.

LED Refresh Rate - With this function you can adjust the dimming frequency.

1. Press either the MENU, UP, or DOWN buttons until “LED Refresh Rate” is displayed and

press ENTER.

2. Use the UP or DOWN buttons to adjust the dimming frequency between 900hz, 1000hz, 1100hz,

1200hz, 1300hz, 1400hz, 1500hz, 6000hz, or 25000hz.

3. Once you have found your desired setting press ENTER to conrm.

Bekijk gratis de handleiding van American DJ Encore Burst 100 IP, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.