American Audio X-Color LED Plus handleiding

Niet gecategoriseerd

American Audio

10 pagina's

PDF beschikbaar

Handleiding

American DJ® - www.americandj.com - X-Color LED Plus Instruction Manual Page 10American DJ® - www.americandj.com - X-Color LED Plus Instruction Manual Page 9

SLND - This will let you set unit as a slave in a master/

slave conguration.

1. Tap the MENU button until “SLND” is displayed, press

ENTER. Either “SL 1”, “SL 2”, “SL 3”, or “SL 4” will be displayed.

2. Tap the UP or DOWN buttons until your desired slave mode

setting is displayed, press ENTER to conm. Each slave mode

is a different light show.

NOTE: In a Master/Slave conguration you can set one xture

to Master and then set the next xture to “SL 2”, the xtures will

now have contrast movement to each other.

SOUN - Sound Active mode.

1. Tap the MENU button until “SOUN” is displayed, press

ENTER.

2. The display will show either “ON” or “OFF”. Press the UP or

DOWN buttons to select “ON” to activate sound active mode, or

“OFF” to deactivate sound active mode.

3. Press ENTER to conrm.

BLND - Blackout or Stand by mode.

1. Tap the either the MENU button until “BLND” is displayed,

press ENTER. Either Yes or No will be displayed.

2. To activate Blackout tap the UP or DOWN buttons until Yes is

displayed, press ENTER to conm and exit. The xture will now

be in Blackout mode. To deactivate Blackout mode, select No

and press Enter.

LED - With this function you can have the LED display

turn off after 10 seconds.

1. Tap the MENU button until “LED” is displayed, press ENTER.

2. The display will show either “ON” or “OFF”. Press the UP or

X-Color LED Plus System Menu

DOWN buttons to select “ON” to keep the LED display on at

all times, or “OFF” to switch to have the LED display switch off

after 10 seconds.

3. Press ENTER to conrm.

DISP - This function will reverse the display 180º.

1. Tap the MENU button until “DISP” is displayed, press ENTER.

2. Press ENTER to “ip” the display. Press ENTER to “ip” it

again. Press ENTER when you have made your desired setup.

TEST - This function will run a self test program.

1. Tap the MENU button until “TEST” is displayed, press ENTER.

2. The xture will now run a self test.

TEMP - With this function you can check the temperature

of the xture.

1. Tap the MENU button until “TEMP” is displayed, press ENTER.

2. The running time of the xture will now be displayed. Press

MENU to exit.

FHRS - With this function you can display the running time

of the xture.

1. Tap the MENU button until “FHRS” is displayed, press

ENTER.

2. The running time of the xture will now be displayed. Press

MENU to exit.

VER - With this function you can display the version soft-

ware of the xture.

1. Tap the MENU button until “VER” is displayed, press ENTER.

2. The software version will now be displayed. Press MENU to

X-Color LED Plus System Menu

Bekijk gratis de handleiding van American Audio X-Color LED Plus, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.