American Audio PRO-DJ handleiding
Handleiding
Je bekijkt pagina 14 van 26
9. CHANGING THE TIME DISPLAY (37, 39, & 40)/TIME BAR (38):
The time may be displayed in three different modes; Elapsed, Remain, and Total Remain. During normal play-
back, pressing the TIME BUTTON (20) as in figure 10, will change the time display information (37, 39, 40, &
38) in the LCD. The following is a break down of the time settings and their definitions:
1)
ELAPSED (41) - This details the time in the LCD (5) as the current tracks’
elapsed running time. The elapsed function only details a tracks elapsed
time and not the entire disc.
2)
REMAIN (33) - This details the time in the LCD (5) as the current tracks’
remaining running time.
3) TOTAL REMAIN (31) - This details the time in the LCD (5) as the total disc
remaining time.
TIME BAR INDICATOR - The time bar in the LCD visually details the time
defined in the TIME METER (37, 39, & 40). This bar is also dependent on the
selected time functi
on (TOTAL REMAIN (31), REMAIN (33) or ELAPSE (41).
This bar will begin to flash when 15 seconds of a track remain and will
begin to rapidly flash when three seconds of a track remain. The flash
-
ing bar is a great visual reminder a track is about to end. The flashing
bar will function regardless of which time mode the unit is in.
BASIC OPERATIONS (CONT.)
8. FRAME SEARCH
This feature allows you to scroll through a track to set a cue, starting
sample, or loop point. To use the scroll function you must first be in Pause
Mode or Cue Mode. Once you are in Pause or Cue mode, use your finger tip
to turn the JOG WHEEL (6)
to scroll through the track (figure 8). Turning the
wheel in a clockwise direction will advance the frame search and turning the
wheel in a counter-clockwise direction rewinds the frame search. When you
use the JOG WHEEL (6) the monitor (headphone level) function allows you
to here what you are scrolling through. Once you reach your desired start
-
ing point you can set a cue (starting) point by pressing the PLAY/PAUSE
BUTTON 11)
as in figure 9. Pressing the CUE BUTTON (9) will return the
disc to the cue point just set.
9. SCANNING (FAST FORWARD / FAST REVERSE)
This function gives you a fast search through a disk or track. To do
this turn SHUTTLE WHEEL (6) in clockwise direction for fast forward
or counterclockwise for fast reverse. You can scan in 6 different for
-
ward and 6 different reverse speeds depending on how much you
rotate the wheel.
Figure 8
Figure 9
©American Audio® - www.americandj.com - Pro-DJ™ Instruction Manual Page 14
Figure 10
Bekijk gratis de handleiding van American Audio PRO-DJ, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | American Audio |
| Model | PRO-DJ |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3562 MB |
