American Audio LED Beam Scan handleiding
Handleiding
Je bekijkt pagina 6 van 10
American DJ® - www.americandj.com - LED Beam Scan Instruction Manual Page 11
American DJ® - www.americandj.com - LED Beam Scan Instruction Manual Page 12
1. Tap the MENU button until “TEST” is displayed, press ENTER.
2. The xture will now run a self test.
FHRS - With this function you can display the running time
of the unit.
1. Tap the MENU button until “FHRS” is displayed, press
ENTER.
2. The running time of the xture will now be displayed. Press
MENU to exit.
VER - With this function you can display the version soft-
ware of the unit.
1. Tap the MENU button until “VER” is displayed, press ENTER.
2. The software version will now be displayed. Press MENU to
exit.
REST - Use this function to reset the unit.
1. Tap the MENU button until “REST” is displayed, press ENTER.
2. The xture will now reset.
LED Beam Scan System Menu
2. The display will show either “ON” or “OFF”. Press the UP or
DOWN buttons to select “ON” to activate sound active mode, or
“OFF” to deactivate sound active mode.
3. Press ENTER to conrm.
BLND - Blackout or Stand by mode.
1. Tap the MENU button until “BLND” is displayed, press
ENTER. Either Yes or No will be displayed.
2. To activate Blackout tap the UP or DOWN buttons until “Yes”
is displayed, press ENTER to conm. The xture will now be in
Blackout mode. To deactivate Blackout mode, select “No” and
press Enter.
LED - With this function you can have the LED display
turn off after 10 seconds.
1. Tap the MENU button until “LED” is displayed, press ENTER.
2. The display will show either “ON” or “OFF”. Press the UP or
DOWN buttons to select “ON” to keep the LED display on at
all times, or “OFF” to switch to have the LED display switch off
after 10 seconds.
3. Press ENTER to conrm.
IDSP - This function will reverse the display 180º.
1. Tap the MENU button until “IDSP” is displayed, press ENTER.
2. Press ENTER to “ip” the display. Press ENTER to “ip” it
again. Press ENTER when you have made your desired setup.
TEST - This function will run a self test program. The test
program will test pan/tilt movement and colors.
LED Beam Scan System Menu
With this feature you can connect the xtures to one another
using the IEC input and output sockets. The quantity that can be
connected is 48 xtures maximum. After 48 xtures you will need
to use a new power outlet. They must be the same xtures. DO
NOT mix xtures.
LED Beam Scan Power Cord Daisy Chaining
Bekijk gratis de handleiding van American Audio LED Beam Scan, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | American Audio |
| Model | LED Beam Scan |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2003 MB |
