American Audio LED Beam Scan handleiding

Niet gecategoriseerd

American Audio

10 pagina's

PDF beschikbaar

Handleiding

American DJ® - www.americandj.com - LED Beam Scan Instruction Manual Page 10American DJ® - www.americandj.com - LED Beam Scan Instruction Manual Page 9

LED Beam Scan System Menu

System Menu: When making adjustments you can press

ENTER to conrm your setup or you can wait 8 seconds for

automatic setup. To exit without making any adjustments

press the MENU button.

ADDR - DMX Address Setting.

1. Tap the either the MENU, UP, or DOWN buttons until “ADDR”

is displayed, press ENTER.

2. The current address will now be displayed and ashing.

Press the UP or DOWN buttons to nd your desired address.

Press ENTER to set your desired DMX address.

CHND - This will let you select your desired DMX Channel

mode. There are two channel modes to choose from 3 Chan-

nel mode and 5 Channel mode.

1. Tap the MENU button until “CHND” is displayed, press

ENTER.

2. “X CH” will now be displayed, “X” represents the displayed

DMX channel mode. Press the UP or DOWN buttons to nd your

desired Channel mode.

3. Press ENTER, and then press and hold the MODE button for at

least three seconds to conrm.

SLND - This will let you set unit as a master or slave in a

master/slave conguration.

1. Tap the MENU button until “SLND” is displayed, press

ENTER. Either “SL 1” or “SL 2” will be displayed.

2. Tap the UP or DOWN buttons until your desired setting is

displayed, press ENTER to conm.

NOTE: In a Master/Slave conguration you can set one xture

to Master and then set the next xture to “SL 2”, the xtures will

now have contrast movement to each other.

SHND - This will let you choose one of the four prepro-

grammed shows. See show descriptions below.

1. Tap the either the MENU button until “SHND” is displayed,

press ENTER. Either “SH 1”, “SH 2”, “SH 3” or “SH 4” will be dis-

played.

2. Tap the UP or DOWN buttons to nd you desired show and

then press ENTER to conm and exit.

PAN - Pan Inversion

1. Tap the MENU button until “PAN” is displayed, press ENTER.

Either “NO” or “I” will be displayed.

2. To activate the Pan inversion tap the UP or DOWN buttons

until I is displayed, press ENTER to conm. To deactivate Pan

inversion, select NO and press Enter.

MANU - With this function you can manually test the indi-

vidual features.

1. Tap the MENU button until “MANU” is displayed, press

ENTER.

2. Press the UP or DOWN buttons to nd and manually test

the individual features. Press ENTER when you have found the

feature you want to test.

SOUN - Sound Active mode.

1. Tap the MENU button until “SOUN” is displayed, press

ENTER.

LED Beam Scan System Menu

Bekijk gratis de handleiding van American Audio LED Beam Scan, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.