American Audio Accu Spot Pro handleiding

Niet gecategoriseerd

American Audio

26 pagina's

PDF beschikbaar

Handleiding

American DJ® - www.americandj.com - Accu Spot Pro Instruction Manual Page 37 American DJ® - www.americandj.com - Accu Spot Pro Instruction Manual Page 38

02Er – TILT movement error:

If the head is not located in the default tilt position after start-

up or after a reset command. This message will appear after a

xture reset, if the tilt magnetic-indexing circuit malfunctions

(sensor failed or magnet is missing) or there is a stepper motor

failure (defective motor or a defective motor IC drive on the

main PCB).

03Er - Color-wheel error:

If the color wheel is not located in the default position after

start-up or after a reset command. This message will appear

after a xture reset, if the color wheel’s magnetic-indexing cir-

cuit malfunctions (sensor failed or magnet is missing) or there is

a stepper motor failure (defective motor or a defective motor IC

drive on the main PCB).

04Er - Rotating gobo-wheel error:

If the gobo-wheel is not located in the default position after

start-up or after a reset command.This message will appear

after a xture reset, if the gobo wheel’s magnetic-indexing cir-

cuit malfunctions (sensor failed or magnet is missing) or there is

a stepper motor failure (defective motor or a defective motor IC

drive on the main PCB).

Accu Spot Pro Error Codes

Operating Modes: The Accu Spot Pro can operate in three dif-

ferent modes. This next section will detail the differences in the

operating modes.

• Stand alone mode -

The unit will react to sound, or chase through the built-in programs.

• Master/Slave mode -

You can daisy chain up to 16 units together to get a synchronized

light show without the need of an external controller. The units will

react to sound or chase through the built-in programs.

• DMX control mode -

This function will allow you to control each individual fixtures traits

with a standard DMX-512 controller such as the Elation® Show

Designer.

™

Universal DMX Control: This function allows you to use a uni-

versal DMX-512 controller such as the Elation® DMX Operator™ or

Elation® Show Designer™ to control head movement, the color wheel,

gobo wheel, prism, and the shutter (strobe). A DMX controller allows

you to create unique programs tailored to your individual needs.

NOTE: The Accu Spot Pro comes with a precaution mode incase

the DMX Signal is lost. Please see AUTO on pages 14 and 18 for

the different modes.

1. The Accu Spot Pro uses sixteen DMX channels. See pages 42-45

for detailed description of the DMX traits.

2. To control your fixture in DMX mode, follow the set-up procedures

on pages 10-12 as well as the set-up specifications that are

included with your DMX controller.

3. Use the controller’s faders to control the various DMX fixture traits.

4. This will allow you to create your own programs.

5. Follow the instruction on page 16 to set the DMX address.

6. For longer cable runs (more than a 100 feet) use a terminator on

the last fixture.

7. For help operating in DMX mode consult the manual included

with your DMX controller.

Stand-Alone (Sound Active or Auto Program): This mode allows

a single unit to run to the beat of the music or run through a built-in

program.

Accu Spot Pro Operation

Bekijk gratis de handleiding van American Audio Accu Spot Pro, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.