American Audio Accu Spot Pro handleiding

Niet gecategoriseerd

American Audio

26 pagina's

PDF beschikbaar

Handleiding

American DJ® - www.americandj.com - Accu Spot Pro Instruction Manual Page 29 American DJ® - www.americandj.com - Accu Spot Pro Instruction Manual Page 30

Accu Spot Pro System Menu

4. Press the UP or DOWN buttons to select either “SP-1” or

“SP-2”.

5. Press ENTER to select your desired mode.

DIMM - With this function you can control the dimmer

speed

1. Access the main menu.

2. Tap the UP button until “SPEC” is displayed, press ENTER.

3. Tap the UP button until “DIMM” is displayed, press ENTER.

4. Press the UP or DOWN buttons to select either “SLOW” or

“FAST”.

5. Press ENTER to select your desired mode.

FANS - With this function you can choose between the fan

settings of High or Auto. The default setting is Auto.

1. Access the main menu by pressing MODE/ESC button.

2. Tap the UP button until “FANS” is displayed, press ENTER.

3. Press the UP or DOWN buttons to select either “HIGH” or

“AUTO”.

4. Press ENTER to conrm your selection.

5. Press MODE/ESC to return to the main menu.

VER - Use this function to display the Software version of

the unit.

1. Access the main menu.

2. Tap the UP button until “SPEC” is displayed, press ENTER.

3. Tap the UP button until “VER” is displayed, press ENTER.

Accu Spot Pro System Menu

4. The display will show “V-1.0”, the display may also show, “V-

2.0”, “V-9.9” etc.

5. Press MODE/ESC to exit.

ADJU - Use this function is used to make sure all motors

are aligned and to adjust any motors that are not.

1. Access the main menu.

2. Tap the UP button until “SPEC” is displayed, press ENTER.

3. Tap the UP button until “ADJU” is displayed, press ENTER.

4. Tap the UP button until “CODE” is displayed, press ENTER.

5. The display will show “CXXX”, were as “XXX” represents the

calibration password. The calibration password is “C050.” Use

the UP or DOWN buttons to enter the proper password.

6. Once the proper password is entered the display will read

“CHXX”, were as “XX” represents the xture channel number, in

the case of the Accu Spot Pro 1~16.

7. Select the desired channel to be calibrated by pressing the

UP or DOWN buttons and then ENTER to conrm.

8. The display will then read “XXXX”, were “XXXX” stands for

the calibrate values.

9. Adjust the desired calibration value between –128 and 127

by pressing the UP and DOWN. As you scroll up and down

through the calibration values you will

notice slight changes in the wheel or motor you are attempting

to calibrate.

10. Once you reach your desired calibration press ENTER to

conrm and lock in your calibration.

11. Once you are completely nished press MODE/ESC to

return to the main menu.

Bekijk gratis de handleiding van American Audio Accu Spot Pro, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.