American Audio Accu Spot Pro handleiding

Niet gecategoriseerd

American Audio

26 pagina's

PDF beschikbaar

Handleiding

American DJ® - www.americandj.com - Accu Spot Pro Instruction Manual Page 28American DJ® - www.americandj.com - Accu Spot Pro Instruction Manual Page 27

DLAY - With this function you can set a lamp delay time.

1. Access the main menu by pressing MODE/ESC button.

2. Tap the UP button until “SPEC” is displayed, press ENTER.

3. Tap the UP button until “DLAY” is displayed, press ENTER.

4. The display should show “D-00”. Press the UP button in

order to select your desired delay time.

5. Press ENTER to conrm.

6. Press MODE/ESC to return to the main menu.

SPOT - With this function you can adjust the lamp via

the control board. The shutter opens and the lamp can be

adjusted. In this mode, the device will not react to any con-

trol signal.

1. Access the main menu by pressing MODE/ESC button.

2. Tap the UP button until “SPEC” is displayed, press ENTER.

3. Tap the UP button until “SPOT” is displayed, press ENTER.

4. Press the UP or DOWN buttons to select either “ON” to acti-

vate this function, or “OFF” to deactivate this function.

5. Press ENTER to conrm.

6. Press MODE/ESC to return to the main menu.

DFSE - With this function you can restore the factory set-

tings of the device. All settings will be set back to default

settings. Any saved or edited scenes will be lost. When

restoring the factory settings the unit must be set to the

address that the unit was in when you started editing.

1. Access the main menu by pressing MODE/ESC button.

Accu Spot Pro System Menu Accu Spot Pro System Menu

2. Tap the UP button until “SPEC” is displayed, press ENTER.

3. Tap the UP button until “DFSE” is displayed, press ENTER.

4. The display will show “ON/OFF”.

5. Press the UP button to display “ON” to activate this function,

or “OFF” to deactivate this function.

6. Press ENTER to conrm.

7. Press MODE/ESC to return to the main menu.

When you exit this function, the unit will begin to reload

data.

FEED - With this function you can switch the Pan/Tilt error

correction on and off. This will automatically correct the

Pan/Tilt if it is somehow moved out of place.

1. Access the main menu by pressing MODE/ESC button.

2. Tap the UP button until “SPEC” is displayed, press ENTER.

3. Tap the UP button until “FEED” is displayed, press ENTER.

4. Press the UP or DOWN buttons to select either “ON” to acti-

vate this function, or “OFF” to deactivate this function.

5. Press ENTER to conrm.

6. Press MODE/ESC to return to the main menu.

SPEE - With this function you can select the movement

mode

1. Access the main menu.

2. Tap the UP button until “SPEC” is displayed, press ENTER.

3. Tap the UP button until “SPEE” is displayed, press ENTER.

Bekijk gratis de handleiding van American Audio Accu Spot Pro, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.