American Audio Accu Spot 250 handleiding
Handleiding
Je bekijkt pagina 9 van 20
2. Tap the UP button until “NODE” is displayed, press ENTER.
3. Tap the UP button until “SLAV” is displayed, press ENTER.
4. Press ENTER, the display will show “ON/OFF”.
5. Press the UP button to select “ON” to activate this unit as a
slave, or “OFF” to deactivate this unit.
6. Press ENTER to confirm.
7. Press EXIT/DN to return to the main menu.
RUN With the function “RUN”, you can run the units inter-
nal program. You can set the number of steps under Step.
You can edit the individual scenes under Edit. You can run
the individual scenes either automatically “AUTO”, or sound-
active “SOUN”. The selection “ALON” means stand alone and
“MAST” means that the unit is designated as the master in
master/slave mode.
1. Access the main menu.
2. Tap the UP button until “NODE” is displayed, press ENTER.
3. Tap the UP button until “RUN” is displayed, press ENTER.
4. “AUTO” is displayed. If you press the UP button it will show
“SOUN”. Select which one you want to activate, and press
ENTER.
5. Press UP, to select “ALON” or “NAST”. Which mean stand
alone, and master/slave mode.
6. Select a mode, and press ENTER to confirm.
7. Press EXIT/DN to return to the main menu.
DISP Display the DMX-512 value of each channel -
1. Access the main menu.
American DJ® - www.americandj.com - Accu Spot 250™ Instruction Manual Page 18
Accu Spot 250™ System Menu
American DJ® - www.americandj.com - Accu Spot 250™ Instruction Manual Page 17
Accu Spot 250™ System Menu
2. Tap the UP button until “NODE” is displayed, press ENTER.
3. Tap the UP button until “DISP” is displayed, press ENTER.
4. “VALU” should now be displayed, press ENTER.
5. The display should show “D-00”. Press the UP button in
order to select the desired channel. If you select “D-05” the
display will only show the DMX value of the 5th channel
6. Press ENTER to confirm.
7. Press EXIT/DN to return to the main menu.
Now the display will change as per the 5th channel DMX
value.
CLDI Shuts off digital display after 2 minutes.
1. Access the main menu.
2. Tap the UP button until “NODE” is displayed, press ENTER.
3. Tap the UP button until “DISP” is displayed, press ENTER.
4. “CLDI” should now be displayed, press ENTER.
5. The display will show “ON/OFF”. Press the UP button to
select “ON” to activate this function, or “OFF” to deactivate this
function.
6. Press ENTER to confirm.
7. Press EXIT/DN to return to the main menu.
LAMP MAIN MENU -
OPEN With this function you can switch the lamp on or off
via the control board.
1. Access the main menu.
2. Tap the UP button until “LAMP” is displayed, press ENTER.
Bekijk gratis de handleiding van American Audio Accu Spot 250, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | American Audio |
| Model | Accu Spot 250 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2931 MB |
