American Audio Accu LED MH handleiding
Handleiding
Je bekijkt pagina 7 van 20
American DJ® - www.americandj.com - Accu LED MH Instruction Manual Page 14American DJ® - www.americandj.com - Accu LED MH Instruction Manual Page 13
Accu LED MH System Menu
RTILT (REVERSE TILT) MENU -
ON/OFF - When “On” is chosen it will reverse the tilt.
FINE MENU -
ON/OFF - Switch between 8bit and 16bit.
MIC MENU -
M-01-M-70 - With this function you can make the internal mic
more or less sensitive to sound.
DISPLAY MENU -
VALU (DMX-512 Value) - Display the DMX-512 value of each
channel.
D ON - Display will turn off in 2 minutes.
FLIP - “Flips” the digital display 180º.
SPEC MENU -
RDMX - Lets you adjust the DMX address via external controller.
SPEE - Lets you select the movement mode.
DFSE (Default Settings) - Resets the unit to the default settings.
FEED - Pan/Tilt feedback (error correction) on/off.
VER (Version) - Displays the software version
ADJU - Calibration functions
EDIT MENU -
STEP (S-01 - S-48) - These are the steps slots that you write
your programs into. There are at total of 48 steps. See edit pro-
gram.
SCXX (SC01 - SC30) - These are the scenes that are stored in
your program. There are a total of 30 scenes.
REC - This will auto save your custom program.
RUN - This will run your custom program.
Accu LED MH System Menu
On-Board System Menu.
The Accu LED MH ccomes with an easy
to navigate system menu. This next section will detail the functions of
each command in the system menu.
To access the main menu press the MODE/ESC button (7) on the front
of the unit. Tap the UP (5) or DOWN (6) butons until you reach function
you wish to change. When you reach the function you wish to change
tap the ENTER button. Again, tap the UP or DOWN buttons to change
the function. Once your changes are made, tap the ENTER button to
lock the change in the system, if the ENTER button is not selected
within eight seconds the system will automatically return to menu sec-
tion. To exit without making any changes tap the MODE/ESC button
(4).
ADDR MAIN MENU -
ADDR DMX Address Setting via control board -
1. Access the main menu.
2. Tap the UP button until “ADDR” is displayed, press ENTER.
4. Now the display will show “A001”. Adjust the DMX address
by pressing the UP or DOWN buttons.
5. Press ENTER to conrm.
6. Press the MODE/ESC button to return to the main menu.
When the display is on “A001”, you can directly press the UP
or DN buttons to change the DMX start address.
TEST MAIN MENU -
TEST - This will test the functions of each channel.
1. Access the main menu.
2. Tap the UP button until “TEST” is displayed, press ENTER.
3. The display will show “T-01”. You can now press the up
button and test the different channels.
Bekijk gratis de handleiding van American Audio Accu LED MH, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | American Audio |
| Model | Accu LED MH |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3074 MB |
