American Audio 10MXR BT handleiding
Handleiding
Je bekijkt pagina 10 van 19
©American Audio® - www.americanaudio.us - 10MXR BT Instruction Manual Page 10
level. Turn the knob in a clockwise direction to increase the headphone volume.
9. CUe seLeCtor BUttons - These buttons are used to activate a channels “CUE” mode. The
red CUE LED will glow when a channels cue mode is activated. The Cue function sends a channels
incoming signal to the headphones. The cue level is adjusted by the Cue leVel KnoB (8). Be sure
the Cue/ProGraM sWItCh (7) is set to the “CUE” position to hear a selected channel source.
10. Master voLUMe LeveL IndICators - The dual MASTER LEVEL LED indicators are used
to detail the master fader output level. The meters will detail the output level of both the left and right
channels.
11. Feather Fader pLUs CrossFader - This fader is used to blend the output signals of chan-
nels one and two together. When the fader is in the full left position (channel 1), the output signal of
channel one will be controlled by the master volume level. The same fundamentals will apply for chan-
nel two. Sliding the fader from one position to another will vary the output signals of channels one
and two respectively. When the crossfader is set in the center position, the output signals of both the
channels one and channels two will be even.
12. ChanneL voLUMe Fader - These faders are used to control the output signal of any source
assigned to its particular channel. However, master volume is controlled by the Master VoluMe
Control (4).
13. taLkover ControL - This function decreases all signal output except the microphone signal.
The amount of decrease is preset to -14dB and is not user selectable.
14. MIC on/oFF - This button will activate and deactivate the Microphone.
15. MICrophone eQ seCtIon -
MiC GaiN CONTROL - This knob controls the output volume of the Microphone. However, master
volume is controlled by the Master VoluMe Control (4).
MiCROPhONE TREBLE CONTROL - This knob is used to adjust the treble levels of the Micro-
phone with a maximum signal gain of 12dB or maximum signal decrease of -24dB. Turning the knob
in a counter-clockwise direction will decrease the amount of treble applied to the microphone signal,
turning the knob in a clockwise direction will increase the amount of treble applied to microphone
signal.
MiCROPhONE BaSS CONTROL - This knob is used to adjust the low frequency levels of the
microphone with a maximum signal gain of 11dB or maximum signal decrease of -15dB. Turning the
knob in a counter-clockwise direction will decrease the amount of bass applied to the microphone
signal, turning the knob in a clockwise direction will increase the amount of bass applied to micro-
phone signal.
10MXR BT CONTROLS aNd FUNCTiONS
Bekijk gratis de handleiding van American Audio 10MXR BT, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | American Audio |
| Model | 10MXR BT |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2576 MB |
