Amcrest AMDV5M32 handleiding
Handleiding
Je bekijkt pagina 8 van 93
8
Factory Reset Procedures
A factory reset will revert the device back to its original factory settings. To begin the process, you will
need to remove the DVR cover. Use a Phillips head screwdriver to remove the screws on the back/sides
of the DVR. Once the screws have been removed, lift the lid to expose the DVR's motherboard. Please
make sure the DVR is powered on as well to complete the process.
On the motherboard you will notice a small black button. This is the factory reset switch for your DVR:
To factory reset the DVR, press, and hold the factory reset switch for 4 – 5 seconds and unplug the power
adapter. Once power is removed from the unit, press, and hold the factory reset switch for an additional
4 - 5 seconds and power plug the adapter back into the unit. Continue pressing the factory reset button
until you hear a beep and release. The device will be reset to its original factory settings.
Audio Ports
Connect an RCA microphone to the “Audio In” port on the back of the device. If using an audio out device,
such as an RCA speaker, plug the speaker into the “Audio Out” port on the back of the device.
Bekijk gratis de handleiding van Amcrest AMDV5M32, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Amcrest |
| Model | AMDV5M32 |
| Categorie | Bewakingscamera |
| Taal | Nederlands |
| Grootte | 23088 MB |
