Amcrest AMDV5M32 handleiding
Handleiding
Je bekijkt pagina 36 van 93
36
6. Click on the Add button to add the IP Camera to the DVR. If the camera has an inactive status (red dot)
the password may need to be updated
Updating the Password (IP Camera)
Click on the Modify button.
Ensure your camera settings are properly set and enter the password for your newly added IP Camera. If
this is your first time using your camera the username and password will be admin.
Click on Save to save the settings to your camera. If all information was entered correctly, the indicator
icon in the Status field will be green.
Network
This menu controls all network related functions for the DVR and governs how the DVR interacts with a
connected network.
TCP/IP
TCP/IP stands for Transmission Control Protocol/Internet Protocol and it is the language/protocol that
allows communication between internet connected devices, whether on a local network, or a on the
Internet at large. This screen allows for TCP/IP settings to be modified for the DVR to establish connection
to the network.
Below is an explanation of the fields on the TCP/IP settings screen:
NIC Name: The name of the NIC card in the device.
IP Address: This field allows the user to enter a custom IP address.
Network Mode: The current NIC mode detected by the system. The system only supports a single NIC.
NIC Member: The NIC number that is being detected by the system.
Modify: Click the pencil icon to edit TCP/IP information.
NIC Name: The current name of the NIC card.
Network Mode: The current NIC mode detected by the system.
IP Version: The current IP version of the NIC card, IPv4 or IPv6.
MAC Address: This field shows the DVR’s MAC address, which is unique to this DVR. This
number is read-only and is used to access a local area network (LAN).
Mode: Set the NIC card to a static or DHCP mode. DHCP stands for Dynamic Host Configuration
Protocol, and this enables the DVR to automatically obtain an IP address from another network
DVR such as a server or more commonly, a router. When the DHCP function is enabled, the user
cannot modify the IP address, Subnet Mask, or Gateway, as these values are obtained from the
DHCP function. To view the current IP address, DHCP needs to be disabled.
IP Address: This field allows the user to enter a custom IP address.
Subnet Mask: This field allows the user to enter a custom subnet mask. The default subnet mask
is 255.255.255.0. This number is used to determine which subnetwork the IP address belongs to.
Bekijk gratis de handleiding van Amcrest AMDV5M32, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Amcrest |
| Model | AMDV5M32 |
| Categorie | Bewakingscamera |
| Taal | Nederlands |
| Grootte | 23088 MB |
