Ambient Lockit+ handleiding

Handleiding

123456789101112131415161718192021222324252627/ 27

Afdrukken

Je bekijkt pagina 13 van 27

13Lockit+ Users Manual |

Good to Know: Plug and Play Timecode

Instead of using the graphical menu of the Lockit+ (pressing

Red & Green at once) or the web interface - feed in time-

code and frame rate externally.

Just plug the Lockit+ to the TC Out port of another device (e.g.

your Sound Recorder) and it will automatically take over time-

code and frame rate.

This only works if no Single Jam has been sent - or a C-Jam / TX

Master is active in the ACN channel. Indicated by the LED ashing

red and green alternately.

If the device is already jammed and you attach an external time-

code source, you can enter the “Compare Screen”. This displays

a potential timecode drift between external source and your

Lockit.

The built-in server spans a local WiFi, giving users browser-based

access to all the Lockit+ features via mobile device or computer.

Per default the WiFi name and password are both the serial number

of your Lockit+.

Once connected to the WiFi of your Lockit+, you can access the web

interface by entering ”10.0.0.1” or “serialnumber.local” in the address eld

of your browser (z.B. Chrome, Firefox, Safari, Edge …)

If you forgot your WiFi password, you could reset the WiFi and LAN settings

in the shutdown menu. Long-press Power, then press

Red & Green

simultaneously.

8. Access the Web Interface

123456789101112131415161718192021222324252627/ 27

Bekijk gratis de handleiding van Ambient Lockit+, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

Andere merken in Niet gecategoriseerd