Handleiding
Je bekijkt pagina 9 van 15
9
(3.1) Rear Panel
A. Power
Use the included power cable to connect this input to a power outlet. Make sure the P
ower Switch is set
to o when connecting or disconnecting the cable.
B
. Fuse
If the unit’s fuse is broken, lift this tab to replace the fuse. Replace it with a fuse with an appropriate
rating (printed next to the unit’s power cable input). Using a fuse with an incorrect rating can damage
the unit and/or fuse.
C
. Power Switch
Use this switch to power the loudspeaker on or o. Make sure the V
olume knob is set to its minimum
(counterclockwise) position before turning it on.
D
. Cooling Vent
Keep the area in front of this vent clear from obstructions.
E
. Battery Level
These 4 Green LEDs show the battery level from empty to full.
• LOW LED (<25%) The LED will blink when below 10% to indicate the battery is low and in need of
charging.
• 25% (25%-50%)
• 75% (51%-75%)
• 100% (76%-100%)
F
. Signal/Limit LED
This LED illuminates green when audio signal is received, and lights red when a high audio signal level
activates the internal protection circuit. The protection circuit dynamically reduces the signal level to avoid
audible distortion and to protect the woofer and high-frequency driver from over-excursion or mechanical
damage. If this light is lit constantly, or the sound is distorted, reduce the signal level of your sound source,
or lower the volume with the C
H1/CH2 Volume knobs.
Note: The Sig/Limit LED represents both CH1 and CH2.
(3.0) FEATURES
K
N
L
M
Bekijk gratis de handleiding van Alto TX412B, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Alto |
| Model | TX412B |
| Categorie | Speaker |
| Taal | Nederlands |
| Grootte | 1754 MB |
