Alto-Shaam VMC-F3E handleiding
Handleiding
Je bekijkt pagina 27 van 96
INSTALLATION
Vector™ F Series ▪ Operator’s Manual ▪ MN-39279 ▪ Rev 01 ▪ 1/18
27
How to Install the Oven (50 Hz Models Without Cords or Plugs)
Before you begin Make sure you have:
▪ Appropriate cord and plug, minimum oil resistant HO7RN-F. See local codes and
regulations.
▪ Screwdriver (Phillips #2)
▪ Nut driver (1/4-inch)
▪ An appropriate lifting device, and enough personnel, to safely move and position
the weight of the oven.
□ VMC-F3E: (214 kg)
□ VMC-F4E: (272 kg)
Requirements ▪ The oven must be installed on a level surface.
▪ The oven must not be installed in any area where it may be affected by steam,
grease, dripping water, high temperature, or any other severely adverse
conditions.
▪ If required by local codes, use Type F RCD.
▪ The oven is not intended for built-in installation.
Voltages
V Ph Hz A Breaker* kW
Wire
Size
(mm
2
)**
VMC-F3E 380-415 3 50 32-35 50 12.2 - 14.5 4
VMC-F4E 380-415 3 50 42-46 60 16.2 - 19.2 10
*Electrical connections must meet all applicable codes.
**IEC 60335 minimum.
Bekijk gratis de handleiding van Alto-Shaam VMC-F3E, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Alto-Shaam |
| Model | VMC-F3E |
| Categorie | Oven |
| Taal | Nederlands |
| Grootte | 13130 MB |
