Alpine PSS-TSLA-21Y handleiding
Handleiding
Je bekijkt pagina 10 van 14
Tesla Model Y
PSS-TSLA 20240320v3
10/14
Front Door Speaker Installation (EV-65CF-T)
IMPORTANT: For Optimal Sound Quality Sound Dampening Is Highly Recommended for Tesla Applications
1
Remove the Front Door Panels
Pry the Red Reector Clip O Using Slim Panel Remover
Use a T30 Screw Driver Remove (3) Screws in Each Panel
(2) Screws are located under the door grip handle
(1) Screw is located behind the red reector
2
3
Remove 4 bolts securing each factory speaker adapter.
Use 8mm Socket or T25 Torx (Varies depending on year)
The factory Adapter should then unclip easily.
4
Install the new Alpine Speaker & Adapter to the door
panel using the factory screws. Plug in green factory
speaker adapter plug
5
Plug in all remaining factory door connectors. Mount
and re-install each factory door panel using (3) T30 Torx.
Apply Pressure around the door panel to engage the
factory clips. Re-install the Red Reector Clips
IMPORTANT: Re-install ALL Factory Plugs To Their Original Location, FAILURE TO DO SO CAN CREATE COMPUTER FAULTS.
FULLY POWER DOWN YOUR TESLA AND DISCONNECT BATTERY BEFORE CONTINUING. SEE POWER DOWN PROCEDURE
Use a Panel Removal Tool around the edge of the panel
to release the factory clips. Release the panel and pull
upwards to detatch, un-plug the factory panel connec-
tions including the green speaker plug.
(Note: Some cables are non removable leave the door
panel resting on a soft ground surface)
Bekijk gratis de handleiding van Alpine PSS-TSLA-21Y, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Alpine |
| Model | PSS-TSLA-21Y |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 14930 MB |
