Alpine PSS-TSLA-213P handleiding
Handleiding
Je bekijkt pagina 5 van 12
Tesla Model 3 & Y
PSS-TSLA 20240220v2
5/12
Installation Instruction (Power Harness)
IMPORTANT: For Optimal Sound Quality Sound Dampening Is Highly Recommended for Tesla Applications
1
Route 12V Power Harness (Plug J) from the trunk to the
rear bench seat along the passenger side of the vehicle.
Locate the low voltage 12V battery posts in the rear seat
passenger compartment (Under the seat) Use a socket to
remove the battery hardware.
2
IMPORTANT: Re-install ALL Factory Plugs To Their Original Location, FAILURE TO DO SO CAN CREATE COMPUTER FAULTS.
FULLY POWER DOWN YOUR TESLA AND DISCONNECT BATTERY BEFORE CONTINUING. SEE POWER DOWN PROCEDURE
Connect the harness Positive and Negative lug to the low
voltage battery posts under the rear seat & re-tighten
hardware.
3
Route the remote trigger 18awg primary wire (M) to the
rear of the center console. Extra Length is OK
3
J
M
J
-
+
M
Bekijk gratis de handleiding van Alpine PSS-TSLA-213P, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Alpine |
| Model | PSS-TSLA-213P |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 10261 MB |
