Handleiding
Je bekijkt pagina 6 van 23
1110
EN
Webcam
Menu: Press to display OSD menu and enter sub-menus
Up/Left: Press to move Up/Left in menus
Down/Right: Press to move Down/Right in menus
Exit: Press to exit OSD menu
Power: Press to turn monitor on/o
LED Indicator and Power Button
1
2
3
Monitor Controls
USB-A Ports
USB-B Port
HDMI Ports
DisplayPort Port
USB-C Port
Audio Output For Headphones Or Powered Speakers
Power Input
Monitor Ports
8
9
10
11
12
13
14
Indicator Light
The indicator light shows steady white to indicate that the power is on and the
monitor is operating normally. The steady blue light indicates that there is no
video source, an invalid signal, or low voltage is detected. Please make sure that
your computer is turned on and all video cables are fully plugged in or connected.
White Operating Normally
No video source
Invalid signal
Low voltage is detected
Blue
4
5
6
7
2
1
3 4 5 6 7
8 109 11 12 13 14
Unpacking and Assembly
1. Open the lid of the monitor box, remove the upper Styrofoam tray containing
the stand and place it to one side.
Warning: Do not put pressure on the display area of the monitor while
assembling or moving the monitor. The display screen is fragile - applying
force to it will break the display.
Keep the monitor box and Styrofoam packaging for future transportation and
storage of the monitor.
Warning: Open Fold Stand away from face stand stem will spring open
with force.
Warning: Ensure screws are tightly secured before lifting stand.
Note:
We recommend using M4 12-15mm screws if replacements are required.
Before unpacking the stand, ensure that the box is placed on a flat,
clear surface.
Refer to the diagrams on pages 7 and 8
2. Open the soft bag that protects the monitor to reveal where the stand attaches
to the rear of the monitor. Leave the monitor laying in the Styrofoam tray to avoid
damaging it while installing the stand.
3. Take care when removing the elastic band holding the Fold Stand Stem in
position, as the Stem will spring open with surprising force.
4. Insert the Stand Stem into the base and use the thumbscrew beneath the stand
to secure it. You may need to rotate the disc under the stand to expose the
thumbscrew.
5. Insert the stand into the face down monitor, and secure it with the four screws
provided. Your monitor is now ready to use.
Connecting the Power Cable
Connect the included power cable to the power connector, and then plug the other
end into a wall outlet.
Do not apply pressure to the rear of the monitor while fitting the mounting
accessory - downwards pressure on the screen may crack or otherwise
damage it.
1. Lay the monitor face down in its Styrofoam packaging tray.
2. Locate the mounting spacers in the accessory bag that comes with the monitor.
With the monitor laying in its Styrofoam tray, screw in the four spacers into the
holes in the recess where the stand attaches. Do not over tighten - tightening
the spacers too much may cause damage to the monitor.
3. Screw the VESA mounting accessory into the mounting spacers.
4. Carefully lift the monitor and mounting accessory out of the tray and place into
position.
Ensure there is 50mm clearance around all sides of the monitor when it is installed
to ensure that is does not overheat.
Do not attempt to lay the screen on any uneven surface including soft
surfaces such as carpet and seating while attaching the mounting
accessory - damage to the screen may occur.
Mounting Options
The monitor has 100 x 100mm spaced mounting holes to allow it to be mounted to
any compatible 100mm VESA standard monitor arm or wall mount accessory (not
included).
The mounting holes are recessed in the region on the back of the monitor where
the stand attaches and are hidden by the stand when it is installed. VESA mounts
cannot be used with the monitor while the stand is attached.
M4 threaded mounting spacers are included with the monitor which must be used
when mounting the monitor to a monitor arm or other mount. Mount the monitor to
a VESA mounting accessory as follows.
Connecting a Video Source
The monitor includes four video inputs which can be connected simultaneously.
To connect a computer or other source device, plug one of the included HDMI,
DisplayPort or USB-C cables into the computer and into a corresponding port on
the monitor.
Audio Output
The display features inbuilt speakers as well as an audio output jack to allow
headphones and external speakers to be connected. When an external audio
device is connected, the display’s on-board speakers will be disabled.
Connecting the Monitor
Notes:
- The USB-C connection will provide up to 65W of power to computers which
support USB Power Delivery (USB PD). This allows the computer to display video
on the monitor while being charged over a single cable. As a result, the USB-C
connection type is the best option if your computer has this capability.
- Depending on the capabilities of the computer it may not be able to provide 4K
at a full 60Hz refresh rate if connected to the monitor using HDMI. The USB-C
or DisplayPort connection should be used as a first preference if the computer
supports these connection types.
- Not all USB-C ports on computers support video output and/or charging using
USB PD. If your computer does not show video on the monitor or start charging
when connected to the monitor using USB-C, check that the USB-C port on
the computer supports DisplayPort Alternate Mode video output and USB PD
charging.
- Not all USB-C cables support video transfer or charging above 60W. It is
recommended that you use the USB-C cable supplied with the monitor to avoid
potential issues with cables that have been obtained separately.
Bekijk gratis de handleiding van Alogic Clarity Fold Touch 27C4KPDTFS, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Alogic |
| Model | Clarity Fold Touch 27C4KPDTFS |
| Categorie | Monitor |
| Taal | Nederlands |
| Grootte | 3824 MB |