Handleiding
Je bekijkt pagina 64 van 82
64
Operating the monitor
You will see the following message when you set SMART HDR to OFF and later select any predetermined option (without the
symbol) that increases power consumption:
Figure 69. Warning message for changing the default setting
NOTE: Once you select Yes , the message will not appear even if you choose any other predetermined option (without the
symbol). When you perform a factory reset, the message will appear again.
You will see the following message when you change the default setting of a power-saving feature (with the symbol) for the first
time, such as USB CHARGING or FAST WAKEUP:
Figure 70. Warning message for changing the default setting
NOTE: Once you select Yes , the message will not appear even if you choose any other predetermined option (without the
symbol). When you perform a factory reset, the message will appear again.
You will see the following message when the monitor enters the Standby Mode:
Figure 71. Standby mode warning message
NOTE: The message may vary slightly depending on the selected input signal.
Activate the computer and wake up the monitor to gain access to the OSD.
The OSD functions only in the normal operation mode. You will see the following message (depending on the selected input signal) if
you press the joystick button during the Standby mode:
Figure 72. Signal detection warning message
NOTE: The message may vary slightly depending on the connected input signal.
Activate the computer and wake up the monitor to gain access to the OSD.
Bekijk gratis de handleiding van Alienware AW2725Q, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Alienware |
| Model | AW2725Q |
| Categorie | Monitor |
| Taal | Nederlands |
| Grootte | 10160 MB |
