Handleiding
Je bekijkt pagina 63 van 82
63
Operating the monitor
OSD warning message
You will see the following message when the monitor does not support a particular resolution mode:
Figure 65. Warning message if a particular resolution mode is not supported
This means that the monitor cannot synchronize with the signal that it is receiving from the computer. See Monitor specifications for
the horizontal and vertical frequency ranges addressable by this monitor. The recommended resolution is 3840 x 2160.
NOTE: The message may vary slightly depending on the connected input signal.
You will see the following message before the DDC/CI feature is disabled:
Figure 66. DDC/CI warning message
You will see the following message when you increase the BRIGHTNESS level above the factory default setting for the first time:
Figure 67. Warning message when increasing the BRIGHTNESS level
NOTE: If you select Ye s , the message will not appear the next time you change the BRIGHTNESS setting.
You will see the following message when you set PRESET MODES to FPS, MOBA/RTS, or SPORTS for the first time:
Figure 68. Warning message of setting PRESET MODES
NOTE: If you select No, the BRIGHTNESS level will change to 75% for these PRESET MODES.
Bekijk gratis de handleiding van Alienware AW2725Q, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Alienware |
| Model | AW2725Q |
| Categorie | Monitor |
| Taal | Nederlands |
| Grootte | 10160 MB |
