Handleiding
Je bekijkt pagina 67 van 69
67
Troubleshooting
Universal Serial Bus (USB) specific problems
Table 30. Universal Serial Bus (USB) specific problems.
Common symptoms What you experience Possible solutions
USB interface is not
working
USB peripherals are not
working
• Check that your display is turned ON.
• Reconnect the upstream cable to your computer.
• Reconnect the USB peripherals (downstream connector).
• Turn off your monitor and turn it on again.
• Restart your computer.
• Certain USB devices such as portable hard drive require higher power
source; connect the drive to the computer directly.
USB interface is slow USB peripherals working
slowly or not working at
all
• Check that your computer supports USB 5Gbps.
• Some computers have slower USB 2.0 and USB 1.1 ports. Ensure that the
correct USB port is used.
• Reconnect the upstream cable to your computer.
• Reconnect the USB peripherals (downstream connector).
• Restart your computer.
Wireless USB
peripherals stop
working when a USB
device is plugged in
Wireless USB peripherals
responding slowly or only
working as the distance
between itself and its
receiver decreases
• Increase the distance between the USB peripherals and the wireless USB
receiver.
• Position your wireless USB receiver as close as possible to the wireless USB
peripherals.
• Use a USB-extender cable to position the wireless USB receiver as far
away as possible from the adjacent USB Type-A port.
Bekijk gratis de handleiding van Alienware AW2725DM, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Alienware |
| Model | AW2725DM |
| Categorie | Monitor |
| Taal | Nederlands |
| Grootte | 6932 MB |
