Handleiding
Je bekijkt pagina 63 van 69
63
Troubleshooting
Built-in diagnostics
Your monitor has built-in diagnostic tools that help you determine if the screen abnormality or audible noise you are experiencing is
an inherent problem with your monitor.
Figure 54. The message of Built-in diagnostics
To run the built-in diagnostics:
1.
Ensure that the screen is clean (there are no dust particles on the surface of the screen).
2.
Move or press the joystick button to launch the Menu Launcher.
3.
Move the joystick button up to select and open the Main Menu.
4.
Move the joystick button to navigate and select OTHERS > SELF-DIAGNOSTIC from the OSD menu.
5.
Press the joystick button to start the built-in diagnostics. A gray screen is displayed.
6.
Observe if the screen has any defects or abnormalities.
7.
Toggle the joystick button once again until a red screen is displayed.
8.
Observe if the screen has any defects or abnormalities.
Repeat steps 7 and 8 until the screen displays green, blue, black, and white colors. Note any abnormalities or defects.
The test is complete when a text screen is displayed. To exit, toggle the joystick button control again.
If you do not detect any screen abnormalities upon using the built-in diagnostic tool, the monitor is functioning properly. Check the
video card and computer.
Bekijk gratis de handleiding van Alienware AW2725DM, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Alienware |
| Model | AW2725DM |
| Categorie | Monitor |
| Taal | Nederlands |
| Grootte | 6932 MB |
