Alfatron ALF-12X-BC handleiding
Handleiding
Je bekijkt pagina 22 van 42
Alfatron ALF-12X-BC
21
4. Network Connection
4.1. Connecting Mode
1) Direct connection: Connect the camera and computer via a network connecting cable.
2) Internet connection mode: Connect the camera to the Internet via Router or Switch and user can log in to the device via browser.
Note: Please do not place the power and network cables in places where it can easily be trampled or accessed to prevent lowered
video quality and unstable signal transmission due to poorly connected or damaged cables.
The computer must have the network segment which the camera IP address belongs to. The device will not be accessible without the
segment.
E.G. The camera default IP address is 192.168.5.163, then segment 5 must be added in the computer. Specific steps are shown
below:
Image 4.1.1 Local Network Setting
A. Firstly, open the window of the Local Area Connection Properties on computer, select the “Internet protocol version
4(TCP/IPv4)” as shown in Image 4.1.1.
B. Double click or click the property “Internet” protocol version 4 (TCP/IPv4) to enter into the “Internet Protocol Version 4
(TCP/IPv4)” Properties window, and select “Advanced” option as shown in Image 4.1.1
C. Select “Advanced” to enter into the Advanced TCP/IP Setting and add IP and subnet mask in the IP browser as seen in Image
4.1.2, Click “Confirm” to finish adding of IP segment. User can add the corresponding network segment according to the
revised IP address of the camera.
Bekijk gratis de handleiding van Alfatron ALF-12X-BC, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Alfatron |
| Model | ALF-12X-BC |
| Categorie | Bewakingscamera |
| Taal | Nederlands |
| Grootte | 7859 MB |
