Alfatron ALF-10X-CAM handleiding
Handleiding
Je bekijkt pagina 31 van 39
ALFATRON ALF-5/10/12/20X/30X-CAM
31
Double-click the dialog box after searched the user WIFI hotspot, and then input a password to connect WIFI. It connected
successfully after shown the “successful connect” window.
3) Wireless WiFi log in page
If you do not check the above configuration DHCP (automatically obtain IP), then open the browser, enter the wireless network IP
address in the address bar (default 192.168.1.250), press Enter to log construction; If you checked DHCP, then you obtain IP
automatically, just login specific router or switch user interface settings to view the allocation of IP address.
5.
Serial Communication Control
Under common working conditions, the camera can be controlled through RS232/RS485 interface(VISCA), RS232C
serial parameter are as follows:
Baud rate: 2400/4800/9600/115200 bits / sec; Start bit: 1; data bits: 8; Stop bit: 1; Parity: None.
After power on, the camera first goes left, then back to the middle position. Self-test is finished after the zoom moved to the farthest
and then back to the nearest position. If the camera saved 0 preset before, it will be back to that position after initialization. At this
point, the user can control the camera by the serial commands.
5.1
VISCA protocol list
5.1.1
Camera return command
Ack/Completion Message
Command packet
Note
ACK
z0 41 FF
Returned when the command is accepted.
Completion
z0 51 FF
Returned when the command has been executed.
z = camera address + 8
Error Messages
Command packet
Note
Syntax Error
z0 60 02 FF
Returned when the command format is different or when a
command with illegal command parameters is accepted
Command Not Executable
z0 61 41 FF
Returned when a command cannot be executed due to current
conditions. For example, when commands controlling the focus
manually are received during autofocus.
5.1.2
Camera control command
Command
Function
Command packet
Note
AddressSet Broadcast 88 30 0p FF
p：Address setting
IF_Clear Broadcast 88 01 00 01 FF I/F Clear
CommandCancel
8x 21 FF
CAM_Power
On 8x 01 04 00 02 FF
Power ON/OFF
Off 8x 01 04 00 03 FF
CAM_Zoom
Stop 8x 01 04 07 00 FF
Tele(Standard) 8x 01 04 07 02 FF
Wide(Standard) 8x 01 04 07 03 FF
Tele(Variable) 8x 01 04 07 2p FF
p = 0(low) - F(high)
Wide(Variable)
8x 01 04 07 3p FF
Direct 8x 01 04 47 0p 0q 0r 0s FF pqrs: Zoom Position
CAM _Focus
Stop 8x 01 04 08 00 FF
Far(Standard)
8x 01 04 08 02 FF
Bekijk gratis de handleiding van Alfatron ALF-10X-CAM, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Alfatron |
| Model | ALF-10X-CAM |
| Categorie | Bewakingscamera |
| Taal | Nederlands |
| Grootte | 9506 MB |
