Akai AM-100 handleiding
Handleiding
Je bekijkt pagina 7 van 120
Auto standby
When playing media from a connected device, the product is automacally switches to standby if:
• No buon is pressed for 10 minutes,
• No audio from a connected device for 10 minutes.
Operaon
Press the POWER buon once to turn ON and hold the buon to power OFF the unit.
Adjusng the volume
Rotate the Volume knob clockwise or press the Volume + on remote control to increase the volume.
Rotate the Volume knob counter-clockwise or press the Volume - on remote control to decrease the
volume. The display will show the volume seng.
Adjust the Tone
R
otate slowly the Tone knob to adjust the tone quality.
Adjust the Treble
R
otate the treble knob clockwise to increase the TREBLE
Rotate the treble knob counter-clockwise to decrease the TREBLE
Adjust the Bass
R
otate the Bass knob clockwise to increase the BASS
Rotate the Bass knob counter-cloc
kwise to decrease the BASS
Adjust the Balance
R
otate the Balance knob clockwise to increase the right channel
Rotate the Balance knob counter-clockwise to increase the le channel
Mute funcon
Pressing the MUTE buon on remote control will mute the volume. “Volume Muted” will appear on the
display. Press this buon again to cancel the mute funcon.
Cl
ock and Timers
Seng the clock and date
Aer the unit is plugged into a mains supp
ly or aer a power failure, the me and date on the LCD display will
blink. The unit should be in standby mode to set the clock.
1. Press Time buon, “Time setup” is displayed, press ENTER to conrm.
2. Press / to select “24H”or “12H”, Press ENTER conm. The hour digits on the display will blink.
3. Press / to set the hour, press ENTER conm, the minutes digits on the display will blink.
4. Press / to set the minut
es, press ENTER conm, the Year digits on the display will blink.
5. Press / to set the Year, press ENTER conm, the Month digits on the display will blink.
6. Press / to set the Month, press ENTER conm, the Day digits on the display will blink.
Press / to set the Day, press ENTER conm, press / the select save “YES/NO”
Seng Alarm
Note: Check that the radio has the correct me and date before you set an alarm.
This unit may be used as an alarm clock. The CD/USB device or buzzer is acvated to play at a preset me.
1. Press POWER to switch the unit to standby mode.
2. Make sure that you have set the clock correctly.
Bekijk gratis de handleiding van Akai AM-100, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Akai |
| Model | AM-100 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 26472 MB |
