Akai AM-100 handleiding
Handleiding
Je bekijkt pagina 14 van 120
14
Whole Disc Repeat
In Play mode, press the REPEAT button 2 times to repeatedly play all tracks on the disc. The display will
show “Repeat All”.
To cancel repeat play, press the REPEAT button repeatedly until the “Repeat off” sign appears.
P
ROGRAM PLAY
The tracks on the disc can be programmed to play in any order (up to 20 tracks can be programmed). Note:
this can only be done while in Stop mode
1.
Press the PROG button while in Stop mode. “P01” “F01” will appear on the display and “T001” will
flash.
2.
Press the or button to select the desired tracks in the album, then press the PROG button to store in
the memory.
3.
The first track number is now stored in memory, and the program number changes to “P02”, waiting
for your next selection.
4.
Repeat Steps 1 – 3 to program additional tracks.
After programming is finished, press the button, and programmed play begins from the first
programmed track. The player stops automatically after all programmed tracks have been played. (Press the
button twice to cancel the programmed tracks memory).
Playing Music via USB
This device has been developed using the latest technical advances in the USB field. However, given the wide
range of USB storage device types that are currently on the market, we unfortunately cannot guarantee full
compatibility with all USB storage devices. For this reason, in rare cases, there may be problems in playing back
files from USB storage devices. This is not due to device malfunction.
1. Press the POWER button to turn on the unit.
2. Press the MODE button repeatedly until ‘USB’ appears on the display.
3. Connect a USB storage device directly into the PLAYER USB port. The display briefly shows the number of
folders and then the total number of tracks. Playback will automatically start.
4. Operation of the control buttons is the same as for MP3 CD playback. Please refer to MP3 DISC SECTION
operations as described previously.
N
OTES:
• Always directly connect a USB stick to the USB port to prevent any malfunctions.
• The PLAYER USB port is not designed for charging external devices.
• Important: Switch the device to a different operating mode before you remove the USB storage device.
A
UX Input Jack
1. Press the POWER button to turn on the unit.
2. Rotate the MODE button repeatedly to select the Aux-In mode. ‘Aux-In’ will appear on the LCD display.
3. Connect the AUX connect wire from the line out jack of your personal player (e.g. portable MP3player) to the
AUX input jack.
4. Start playback from your personal player.
L
ine Input Jack
1. Press the POWER button to turn on the unit.
2. Press the MODE button repeatedly to select the Line-In mode. ‘Line-In’ will appear on the LCD display.
3. Connect the Line connect wire from the line out jack of your personal player (e.g. portable MP3player) to the
Line input jack.
4. Start playback from your personal player.
Bekijk gratis de handleiding van Akai AM-100, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Akai |
| Model | AM-100 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 26472 MB |
