AJA KONA 1 handleiding
Handleiding
Je bekijkt pagina 58 van 98
KONA Capture, Display, Convert v16.2 58 www.aja.com
Options
Source
In RP-188 timecode (SMPTE 12M-2) there can be multiple timecode types in the
data stream. Use this pull-down to select the one you wish to monitor:
• RP188 LTC (Linear timecode)
• RP188 VITC (Vertical Interval timecode)
• LTC Port input
The selection will be displayed in the timecode value to the right of the pull-
down.
User Bits
Select from Raw or VFR. For monitoring a variable framerate (VFR) timecode
(such as Varicam), you may wish to select VFR for User-bits. KONA will detect and
interpret the user-bits and display them next to the checkbox. You will see the
original framerate (30 fps in the figure below) followed by the adjusted frame
padding (two digits reporting discarded and retained frame padding).
NOTE: SMPTE 12M-2 is the updated name and specification for what was RP-188.
SMPTE RP 188 defines a standard for the transmission of time code and control
code in the ancillary data space of a digital television data stream. Time code
information is transmitted in the ancillary data space as defined in ANSI/SMPTE
291M. Multiple codes can be transmitted within a single digital video data stream.
Other time information, such as real time clock, DTTR tape timer information,
and other user-defined information, may also be carried in the ancillary time
code packet instead of time code. The actual information transmitted through
the interface is identified by the coding of a distributed binary bit. Equipment
manufacturers can use the meta data for different purposes.
Presets Screen
Bekijk gratis de handleiding van AJA KONA 1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | AJA |
| Model | KONA 1 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 20265 MB |
