AJA KONA 1 handleiding
Handleiding
Je bekijkt pagina 22 van 98
KONA Capture, Display, Convert v16.2 22 www.aja.com
Figure 15. K3G-Box Model Breakout Box (front view)
RS422
Machine
Control
Longitudinal
Time Code
(LTC)
External
Reference
(loop)
Video Monitor Out
Component/
Composite
Video Output
Analog Audio
Output
AES/EBU Audio In
Channels 1 through 16
All AES/EBU audio connectors have two channels
per connector
SDI Ports 1 through 4AES/EBU Audio Out
Channels 1 through 16
HDMI
Out
Figure 16. K3G-Box Model Breakout Box (rear view)
HDMI Output
from KONA 4
Mini-HDMI connector
SDI Ports
1 through 4
KONA 4
Host
Connector
KONA 4 to K3G-Box Connections
Connectors on the standard cable set are labeled for their function for easy
installation and maintenance. Connectors on the optional K3G-Box (breakout
box) are similarly labeled. Connect the K3G-Box to the KONA 4 card using the
provided adaptor cables.
• A multi-pin host connector attaches the K3G-Box to the KONA 4 card, using
the provided multi-pin cable.
• Four full size 3G-SDI BNC connectors on the K3-Box rear panel connect
to the KONA 4 card's four SDI connectors with the provided DIN to BNC
adapter cable. These signals are routed to the K3-Box's four front panel SDI-
BNC connectors. The 3G-SDI inputs and outputs each support 16-channel
embedded 24-bit digital audio.
• Eight BNC connections are provided for AES/EBU audio input/output, carrying
two channels each, for a total of 16 channels in and out. (The standard
breakout cable supports a total of 8 AES channels in and out.)
• Two analog audio RCA-style unbalanced audio phono output jacks.
• A female RS-422 9-pin D connector is available to control an external device
using RS-422 SMPTE (Sony) protocol.
• A full size HDMI connector on the rear panel of the K3G-Box connects to the
HDMI mini-connector on the KONA 4 card with the provided mini-to-full size
adapter cable. The HDMI output signal from the KONA 4 card is then routed
to the full size HDMI connector on the front of the K3G-Box. The HDMI output
supports up to 8 channels of embedded 24-bit digital audio (HDCP is not
supported).
• Three BNC connectors are available for the output of component, composite
or Y/C analog video. KONA 4 features 12-bit component video output for both
HD and SD. SD can be switched between composite and Y/C. This allows use
of an inexpensive analog monitor for both HD and SD work. You can even
use a composite video monitor. For Dual Link HD-SDI output, HD or SD can
be monitored through the component output. Dual Link HD can be output
Bekijk gratis de handleiding van AJA KONA 1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | AJA |
| Model | KONA 1 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 20265 MB |
