Handleiding
Je bekijkt pagina 9 van 72
ENGLISH
WARNING: Do not operate the motor continuously for more than 60 seconds at a
time. Allow the motor to rest for 180 seconds before continuing.
NOTICE: If the blade is not running smoothly, stop the product and add some
liquid, or reduce the ingredients in the cup.
NOTE: To prevent product overheating, dry ingredients must not be processed
for more than 30 seconds at a time.
GENERAL: For better results: please make sure that the quantity of ingredients
fully covers the blade while chopping solid food.
CAUTION: DO NOT OPERATE THE UNIT WHEN EMPTY.
CAUTION: Before you eat or serve blended food, please always check for
ingredients that might have not been blended adequately.
TROUBLESHOOTING GUIDE
PROBLEMS
POSSIBLE REASONS & SOLUTIONS
Motor doesn’t start or
attachment doesn’t rotate.
For the jars, make sure that the tabs are seated in the slots
and turned clockwise
Food is unevenly chopped.
Either you are chopping too much food at once, or you are
not pulsing properly. Reduce the amount of food in the jar.
Food is too finely chopped or
too watery
The food has been over processed. Use short operating for
best results.
You can not achieve snow
from ice cubes.
For best result use ice straight from the freezer. Try using
short operating instead of long one.
Make sure the jar is completely dry before adding ice.
Jar is leaking
Make sure that your lid or blade assembly is properly
assembled to the jar. Leaking may occur if it is misaligned
when twisted onto the jar. Turn the lid tightly clockwise.
Unit doesn’t turn on
Make sure the unit is plugged in.
Make sure the blade assembly is properly assembled to the
jar and that is not misaligned
Unit doesn’t turn off
Unplug the power cord from the electrical outlet and call
customer service for support
Doesn’t mix well
Pulse ingredients for best results. Press down on the jar in
short intervals for even blending and chopping. For frozen
ingredients, pulse in short intervals of 2-5 seconds and
repeat.
Lid/blade assembly will not
properly align to the jar
Set the jar on a level surface. Place the lid or blade assembly
on top of the jar and align the threads so that the lid/blades
sit flat on the jar. Twist clockwise so that the lid/blades
evenly align to the jar until you have a tight seal.
Bekijk gratis de handleiding van Aiwa Saberu 600 ATB-600, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Aiwa |
| Model | Saberu 600 ATB-600 |
| Categorie | Blender |
| Taal | Nederlands |
| Grootte | 7638 MB |
