Handleiding
Je bekijkt pagina 8 van 72
ENGLISH
NOTICE: Wait until the blender has cooled down suff iciently before cleaning it.
CAUTION: DO NOT immerse the motor base into water or any liquid, or place into
a dishwasher.
1. Separate/remove all parts from each other.
2. Clean the motor base with a slightly damp cloth and wipe dry
3. Place jars in the dishwasher. Place the lids and attachments on the top rack. Use
caution when handling the blade assemblies as the blades are very sharp.
4. Whenever possible, rinse parts immediately after processing to make cleanup
easier.
5. Store the product in a cool, dry place.
NOTE: You may also wash the jars by filling the jar to the Max fill line with warm water
and drop of dish washing detergent, placing the blade assembly on the jar and pulsing
a few times. Do not fill the jar more than Max fill line with water because it will overflow.
Once clean, remove the jar from the motor base. Rinse the jar, attachment and lid
under running water. Allow all the parts to dry before storing.
Do not use scouring pads, abrasive cleaning agents or aggressive liquids such as petrol,
alcohol or acetone to clean the appliance
All detachable accessories can be cleaned in dishwasher.
TIPS: Use a small brush(not included) to remove particles of food lodged underneath
the blades.
If some leftover particles dry onto the inside of the jar, fill the cup about 2/3 full with
warm water and attach the blade subassembly. Place the jar and blade subassembly
onto the motor base and operate the appliance for about 20-30 seconds to help loosen
the stuck ingredients. Repeat the above step but use clean tap water. Empty blender
and dry thoroughly.
CAUTION: Do not try attempt to remove blades from the Blade subassembly for
cleaning.
HOW TO STORE
1. Store the appliance upright. Do not place anything on top. Store the jars and the
rest of the attachments along side the appliance where they will not be
damaged and won’t cause a hazard.
2. Remove and empty the jar and ensure that no food is jamming the cutting
blades.
3. Allow the appliance to cool for approximately 30 minutes.
4. Re-install the jar onto the base and re-plug the appliance into the electric outlet.
5. Proceed to use the appliance as before while making sure not to exceed the
recommended maximum jar capacities.
BUILT-IN SAFETY LOCK
The blender has a built-in safety lock feature, this ensures that you can only switch on
the appliance while the cup and the blade subassembly are assembled on the motor
base securely. If the appliance is correctly assembled, the built-in safety lock will be
unlocked.
IMPORTANT: In the base of each blade’s collar, there is a silicone gasket seal that
creates an airtight fit with the jars. After dishwashing and before each use, always
check to make sure the gasket is properly in place, as the heat from some
dishwashers may cause the gasket to become loose.
Bekijk gratis de handleiding van Aiwa Saberu 600 ATB-600, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Aiwa |
| Model | Saberu 600 ATB-600 |
| Categorie | Blender |
| Taal | Nederlands |
| Grootte | 7638 MB |
