Airlive W6-184QAX handleiding
Handleiding
Je bekijkt pagina 25 van 61
25
Auto Band Steering
By default, this setting is turned off. To enable Band Steering click on the slider bar behind
the function. Enabling Auto Band Steering allows the router to connect devices
automatically on 2.4 or 5GHz band based on the signal strength. When enabled only one
SSID will be shown for both 2.4 and 5Ghz.
Wi-Fi Enable: 2.4Ghz/5Ghz click to enable or disable your 2.4Ghz/5Ghz Wi-Fi.
SSID: Type to modify your SSID name.
Hide SSID: Click to turn on, to hide SSID from being broadcast.
Encryption: Select the Encryption for your wireless network, Select the Encryption type from
the pull-down menu. No Encryption, WPA, WPA2, WPA3, WPA2/WPA, WPA2/WPA3.
Wi-Fi Password: Type to modify your password, click on the eyelash icon to see the
password.
Wi-Fi Channel: Click the pull-down menu to select your wireless channel,
Select Auto and the Router will select the best channel by itself.
Select 1~13 (2.4GHz), 34~64 (5GHz) Channel: Select your wireless channel (channel number
is dependent on your region). To change your region, go to the Advanced menu >> Advanced
Setup >> Country Code, to select your region.
Bandwidth: Default is Auto, which will give the best performance. It is also possible to
change to setting, Select the frequency you want to use. For 2.4GHz this is 20MHz or 40MHz.
For 5GHz the choice is 20MHz, 40MHz or 80MHz.
Transmit Power: Select the TX output power of the router. Select Low, Middle or High.
Bekijk gratis de handleiding van Airlive W6-184QAX, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Airlive |
| Model | W6-184QAX |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 7103 MB |
