Airlive VH-4GW handleiding
Handleiding
Je bekijkt pagina 38 van 192
4. Web Management
AirLive VH-4GW User Manual
34
If choosing “Connect Manually”, this gateway won’t start to establish WAN connection
until you press “Connect” button on web UI. During normal operation, this gateway
will disconnect WAN connection if idle time reaches the value of "Maximum Idle
Time".
Time Schedule
: This option allows you to limit WAN connection available in a certain
time period. You can select
“Always”
option or a time schedule object from the
schedule object list that you can find them in
[System] - [Scheduling]
.
MTU
: MTU refers to "Maximum Transmit Unit". Different WAN types of connection will
have different value. You can leave it with 0 (Auto) if you are not sure about this
setting.
NAT:
By default, it is enabled. If you disable this option, there will be no NAT
mechanism between LAN side and WAN side.
Network Monitoring:
You can do preferred settings by using this feature to monitor
the connection status of WAN interface. Checking mechanism depends on several
parameters defined here. The network monitoring provides the WAN interface status
and then system can prevent embedded 3G/LTE modem from some sort of
auto-timeout and disconnects from the Internet after a period of inactivity.
Enable:
Check the box to do Network Monitoring. By default, it is checked.
DNS Query/ ICMP Checking
: Do the keep alive through DNS query packets or
ICMP
packets.
Loading Checking
: The response time of replied keep-alive packets may increase
when WAN bandwidth is fully occupied. To avoid keep-alive feature work abnormally,
enable this option will stop sending keep-alive packets when there are continuous
incoming and outgoing data packets passing through WAN connection. By default,
the Loading Checking is enabled.
Check Interval
: Indicate how often to send keep-alive packet.
Check Time out
: Set allowance of time period to receive response of keep-alive
packet. If this gateway doesn’t receive response with in this time period, this gateway
will record this keep alive is failed.
Latency Threshold
: Set acceptance of response time. This gateway will record this
keep-alive check is failed if the response time of replied packet is longer than this
setting.
Bekijk gratis de handleiding van Airlive VH-4GW, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Airlive |
| Model | VH-4GW |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 33811 MB |
