Airlive L3-XGF28 handleiding
Handleiding
Je bekijkt pagina 37 van 190
37
threshold.
When a L2 Ethernet interface receives the broadcast, unknown multicast or unicast
messages, the device will forward them to other L2 interfaces in a same VLAN (Virtual
Local Area Network) if the egress interface cannot be recognized according to
destination MAC addresses. As a result, broadcast storm may occur to degrade device
operation performance.
Three kinds of message flow can be controlled by storm policing characteristics to
stay away from broadcast storms.
Instructions:
1. Click the “Port > Storm Control” in the navigation bar to configure the attributes
related to storm policing such as mode as follows:
2. Select the appropriate port and “Edit” it by configuring the policing rates of broadcast,
unknown multicast and unicast storms at each port.
3. Configure info such as storm switch and rate, “Apply” and finish as follows:
Bekijk gratis de handleiding van Airlive L3-XGF28, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Airlive |
| Model | L3-XGF28 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 29079 MB |
