Airforce Slim Pro handleiding

Handleiding

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148/ 148

Afdrukken

Je bekijkt pagina 57 van 148

FUNZIONAMENTO

I

57

OPERATION GB

57

This device allows you to choose the operating mode (suction or ltering) depending on the

installation.

When you rst turn it on, for about ten seconds the display shows which mode is active.

Filtering: the display shows the letter F

Suction: the display shows the letter A

During this phase, you can change the mode by acting on the slider:

To conrm the desired mode, press the button

To recall the choice of the operating mode, remove and re-apply voltage to the device.

Note: if the voltage is lost again, the device displays the last setting selected; to conrm, press the

button or wait 15 seconds; to change this mode, use the slider to select the preferred mode;

to conrm, press the button

Turning the suction on and o:

1. Touch the slider

2. Set the extractor speed level within 3 seconds by touching the slider control (from 1 to 9). The

extractor turns on at the set extraction speed.

Set a higher or lower level using the slider control.

3. Set the extractor speed level to “0” to turn o the extractor.

4. Turn o the induction hob by touching the on/o button.

Note: in lter mode, when the device is turned o, the extraction remains on for 20 minutes at

minimum speed, to allow any condensation that may have formed during the cooking phases to

evaporate.

Intensive:

You can use the Boost function to extract at the highest level for a period of up to 6 minutes. (In

recirculation mode there is no time limit and the Boost function remains active.)

1. Move the slider until “P” appears on the display.

Once the maximum allowed time has elapsed, the extractor speed will be reduced to level 9.

Note: In recirculation mode there is no time limit and the Boost function remains active.

2. Set the extractor speed level to “0” to turn o the extractor.

To recall the choice of operating mode, remove and reconnect the power to the device.

3. Turn o the induction hob by touching the on/o button.





123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148/ 148

Bekijk gratis de handleiding van Airforce Slim Pro, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

Andere merken in Fornuis