AGM Secutor Pro TS50-640 handleiding
Handleiding
Je bekijkt pagina 31 van 48
31ADDER USER MANUAL
3. Align the center of top mark with the edge of target top, and press
the wheel button to confirm.
4. Align the center of bottom mark with the edge of target bottom,
and press the wheel button to confirm.
The left top of the image displays the distance measurement result
and the height of the target. You can select the unit of measurement
(see section 2.2.21).
2.2.14 HOT TRACKING
The device can detect the highest temperature spot in the scene and
mark it on display.
1. Hold the wheel button
to show the menu.
2. Select
/ HOT TRACKING menu item and press the wheel
button
to enable/disable hot spot mark (marking the spot of
highest temperature).
When the hot spot mark is enabled, the
mark displays in the spot
of the highest temperature. When the scene changes, the
mark
moves.
2.2.15 BURNING PREVENTION
This function can prevent damage to the thermal sensor from the
sun or other high temperature bright light source. When enabling
this function, the shield will close until the environment turns to
normal.
1. Hold the wheel button
to go to the menu.
2. Rotate the wheel to select
BURN PREVENTION menu item
and press the wheel button
to enable or disable the Burn
Prevention function.
FIGURE 2-12. DISTANCE MEASUREMENT
Bekijk gratis de handleiding van AGM Secutor Pro TS50-640, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | AGM |
| Model | Secutor Pro TS50-640 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3705 MB |
