AGM Secutor Pro TS50-640 handleiding
Handleiding
Je bekijkt pagina 28 van 48
28 AGM Global Vision
3) Rotate the wheel to select the coordinates, and press the wheel
to switch the X and Y axis.
4) Rotate the wheel to move the reticle until it reaches the target
position. The small reticle indicates the initial position of the
reticle.
7. (Optional) Repeat 3 to 6 to set the position for other reticles in
this group.
NOTE
When you switch the reticle number, a prompt will appear on the
interface. Select OK to save the parameters for the current reticle.
8. Hold the wheel button to exit the interface according to the
prompt:
– OK: Save the parameter and exit.
– Cancel: Exit but not save the parameters.
TABLE 2-5. BORESIGHT CORRECTIONS
MODEL
ADJUSTMENT
VALUE
RETICLE
OFFSET
BORESIGHT INCREMENT
ADDER
TS35-384
1 click 1 pixel
0.13 mil / 0.44 MOA /
1.3 cm at 100 m distance /
0.46 in at 100 p28-yd distance
ADDER
TS50-384
1 click 1 pixel
0.09 mil / 0.31 MOA /
0.9 cm at 100 m distance /
0.32 in at 100 yd distance
ADDER
TS35-640
1 click 1 pixel
0.22 mil / 0.73 MOA /
2.2 cm at 100 m distance /
0.76 in at 100 yd distance
ADDER
TS50-640
1 click 1 pixel
0.15 mil / 0.51 MOA /
1.5 cm at 100 m distance /
0.53 in at 100 yd distance
2.2.9 SHOT ACTIVATED RECORDING (SAR)
After enabling SAR function, the device can automatically record the
7 seconds before the recoil-activation and the 7 seconds after the
recoil-activation.
Bekijk gratis de handleiding van AGM Secutor Pro TS50-640, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | AGM |
| Model | Secutor Pro TS50-640 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3705 MB |
