AGM Secutor Pro TS50-640 handleiding
Handleiding
Je bekijkt pagina 27 van 48
27ADDER USER MANUAL
2.2.8 CORRECTING THE RETICLE
Correcting the reticle can help you aim at the target with high
accuracy by marking the offset between the big reticle and small
reticle.
Select a reticle group first.
1. In the view mode, hold the wheel button to show the menu.
2. Rotate the wheel to select
RETICLE menu item, and press the
wheel to enter the reticle setting interface.
3. Press the wheel button to select a Reticle No. you want to correct.
4. Set the distance to the target:
1) Rotate the wheel to select Distance.
2) Press the wheel button to select the number you want to
change.
3) Rotate the wheel to change the number.
5. (Optional) Rotate the wheel to select Freeze, and press the wheel
to enable the function.
NOTE
When enabling the freeze function in reticle, you can adjust the
position of the cursor on a frozen image. This function can prevent
image flutter.
6. You can boresight the scope by moving the reticle on screen. Set
the reticle position as folows:
1) Aim the big reticle at the target.
2) (Optional) Rotate the wheel to select Zoom, and press the
wheel to switch the zoom ratio.
FIGURE 2-11. CORRECTING THE RETICLE
Bekijk gratis de handleiding van AGM Secutor Pro TS50-640, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | AGM |
| Model | Secutor Pro TS50-640 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3705 MB |
