AGM Rattler-C V2 handleiding
Handleiding
Je bekijkt pagina 5 van 36
Rattler-C V
2
USER MANUAL 5
SAFETY SUMMARY
• Read and follow all instructions
• Read all warnings
• Only use the attachments/accessories specified by the manufacturer
• All service must be provided by the manufacturer
WARNINGS:
• This product contains natural rubber latex, which may cause potentially
fatal allergic reactions! If you are allergic to latex, it is important that you
strictly avoid exposure to products that contain it.
• Always make sure your firearm is unloaded before you place the scope on the
firearm. Reconfirm that the chamber is empty if you stop the procedure then
resume later. Safe handling rules should be followed at all times.
• If a scope is mounted too far to the rear, the eyepiece can injure the shooter’s
brow. Shooting at an uphill angle also increases this hazard because it
shortens the distance between the brow and the rear of the scope. Therefore,
when mounting your scope, we recommend positioning it as far forward in
the mounts as possible. With hard-recoiling rifles, serious injury or even
death can result from eyepiece impact with the shooter during the recoil
process when discharging the firearm. Be certain that your installation
provides sufficient eye relief for the recoil generated by your rifle before
shooting the firearm.
NOTE: Give special attention to this warning when shooting uphill and/or from
a prone position. These shooting conditions can dramatically reduce eye
relief. PLEASE maintain maximum eye relief when shooting heavy recoiling
and/or magnum firearms. THE USER ASSUMES ALL RESPONSIBILITY
AND LIABILITY FOR HAVING THE AGM SCOPE PROPERLY MOUNTED TO
A FIREARM AND USING THE AGM SCOPE PROPERLY. ALWAYS CHECK
THE CONDITION OF YOUR MOUNTING SYSTEM PRIOR TO USING YOUR
FIREARM.
• Proper usage of the device is crucial for safe operation, so make sure to
carefully read this manual.
• If the device was left in storage for a longer period of time, before use, check
its functionality.
• Disassembling of the device is prohibited, except in authorized repair
centers.
• The external optical surfaces should be clean at all times. Touching the
optical surfaces with bare hands is not recommended.
• Sand and sea water can damage the optical coatings.
• Do not point the device directly at the sun.
• Thermal imagery is highly dependent on different scenery and atmospheric
conditions. The same scenery may differ slightly in its appearance to the
user, based on the time of day or night the optic is being used. This is the
result of the level of heat absorption of different objects, which will vary
based on the sun’s placement in the sky at the time of use. The contrast of
live animals will be more evident depending on the difference in surrounding
air temperature and humidity levels.
Bekijk gratis de handleiding van AGM Rattler-C V2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | AGM |
| Model | Rattler-C V2 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3634 MB |